Install Telemetry Server

Owned by Anjali Tyagi
Last updated: Feb 02, 2024 by Bala Harish A(AC)
3 min read

Important

Continue on the same installer to install the Telemetry.

  1. Click Install Telemetry Server.

  2. In the Telemetry summary page, the number of nodes and CPU/Memory per node are prefilled based on the YAML file uploaded. These details are editable so a customer can update them if required.

Important

We recommend not changing the default disk count.

  1. Click Next.

  2. Click Add to add vCenter host information and Telemetry host nodes.

  3. For vCenter host information;

     

    1. Datacenter - Enter the datacenter name.

    2. Datastore - Enter the datastore name.

    3. ESX Host FQDN - Enter the ESX hostname.

    4. Management Network - Management network

    5. Storage Network - Private network

    6. Click Next.

  4. For Telemetry host nodes:

     

    1. Provide the hostname and domain name for Gateway.

    2. Select an access IP as static or DHCP.

      1. For a static IP address:

        • Provide the access IP with a netmask and network gateway IP address.

        • Add the number of DNS servers required using the Add button.

Note

For Static IP, this is not the Swarm storage IP address but your private IP address.

ii. For DHCP, an IP address is assigned by the SCS.

c. Select either Static or DHCP for the storage IP.

i. If static IP is selected, provide the IP address and netmask.

  1. Click Add. It adds the Telemetry host nodes.

The Telemetry host information can be modified after uploading using Edit.

  1. Click Install to initiate Telemetry Installation.

  2. Wait for the Telemetry server installation to complete. When installed, click Finish.

    A success message is displayed saying “Swarm cluster is successfully installed”.

  3. Once the installation has successfully completed, stop and delete the “datacore-sci-template-xxxx” VM

 

© DataCore Software Corporation. · https://www.datacore.com · All rights reserved.