Power on the Swarm Storage Nodes

SCS is ready to boot storage nodes after applying for the Swarm license. Power on each chassis one by one. The SCS assigns an IP address to the storage nodes in sequence. The Swarm storage nodes begin accepting requests after a few minutes.

On some older storage node hardware, the boot process may get stuck at the PXE stage, possibly showing an error related to ldlinux.c32, or a similar error on the screen. If this happens, follow the steps provided here and reboot the affected nodes.

Next, Setup Elasticsearch Cluster

Swarm Documentation

Power on the Swarm Storage Nodes

Analytics

Related content