Install Elasticsearch for SCI

Follow the below steps to install Elasticsearch for SCI:

1. On the Elasticsearch Summary page, hardware specifications are prefilled as per data uploaded using the YAML file. These prefilled hardware specifications (number of nodes, CPU cores per node, and memory per node) are editable so the customer can update values as required. Click Next to proceed.
   

   

   Add one or multiple Elasticsearch nodes as required, using Add button.

2. Provide the vCenter host information.
   

   

   1. DataCenter - Enter the data center name.

   2. DataStore - Enter the datastore name.

   3. ESX Host FQDN - Enter the ESX hostname.

   4. Management Network - Public network

   5. Storage Network - Private network

3. Provide the below Elasticsearch information for installation.

   

   1. Enter the hostname, domain name, and management IP of Elasticsearch.

   2. If the management IP is static:

      1. Provide management network IP with network mass subnet and network gateway IP address.

      2. Add the number of DNS servers required.

4. Select the storage IP as static or DHCP.

   1. If static IP is selected, provide an IP address and network mask.

5. Click Add. It adds Elasticsearch hostname information. The hostname information is editable so a customer can update it if required or can delete it if not required anymore.

   

6. Click Install to initiate installing Elasticsearch. Wait for Elasticsearch installation to complete.