Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Some Swarm configuration settings are site-specific and related to: 

  • DNS settings - These are required for DHCP configuration.

  • Administrative username and password - SCS does not accept any unauthenticated commands once the administrator username and password are set. 

  • Disk encryption settings - These settings are related to “Encryption at Rest” and should be skipped unless specified by DataCore Support. 

Info

This process is interrupted to allow scsctl to be configured with the administrative username and password for future interactions with SCS once the administrative username and password are set. To perform this configuration run: 

scsctl auth login --user [administrative user name] 

This command securely prompts the administrative password and authenticates to SCS. Re-run the configuration scan command to resume once the CLI is logged in:

scsctl diagnostics config scan_missing

Finalize configuration settings

Note

Input characters such as ‘admin.userName’, ‘admin.password’, ‘encryptionKeys’ are hidden when configuring Swarm settings. Best practice is to copy and paste inputs from a raw text editor to prevent any transcription or transposition errors. 

  1. Run scsctl diagnostics config scan_missing

    ====================================================================================================== 
Component: network_boot 
---------------------------------------------- 
Name: network.dnsServers 
Type: array[str] 
Description: Required. DNS servers to be used. 
---------------------------------------------- 
Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP] 
Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 

If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible. 

  2. Press ‘Enter’ to apply settings when prompted for the DNS servers.

    ---------------------------------------------- 
Name: network.dnsServers 
Type: array[str] 
Description: Required. DNS servers to be used. 
---------------------------------------------- 
Missing setting: network_boot/network.dnsServers 

Where would you like to update this setting?
> As a default at group level 
  For each instance in the group 
  Skip this setting for now 

  3. Provide DNS servers.

    ---------------------------------------------- 
Name: network.dnsServers 
Type: array[str] 
Description: Required. DNS servers to be used. 
---------------------------------------------- 
Missing setting: network_boot/network.dnsServers
 network.dnsServers [type: array[str]] (Required. DNS servers to be used.):
172.16.33.4,172.16.33.5

====================================================================================================== 
Component: platform 
------------------------------------------------------------------------------------------------------ 
Name: admin.password 
Type: str 
Description: Administrative user password 
------------------------------------------------------------------------------------------------------ 
Name: admin.userName 
Type: str 
Description: Administrative user name 
------------------------------------------------------------------------------------------------------ 
Name: logging.syslogHost 
Type: str 
Description: If defined, then the host that component instances should use for syslog logging. 
------------------------------------------------------------------------------------------------------ 
Name: network.dnsDomain 
Type: str 
Description: Required. The DNS domain name that will be used. 
------------------------------------------------------------------------------------------------------ 
Name: network.ntpServers 
Type: array[str] 
Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network.
------------------------------------------------------------------------------------------------------ 
Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP] 
Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!

If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
------------------------------------------------------------- 
Name: admin.password 
Type: str 
Description: Administrative user password 
------------------------------------------------------------- 
Name: admin.userName 
Type: str 
Description: Administrative user name 
------------------------------------------------------------- 
Name: network.dnsDomain 
Type: str 
Description: Required. The DNS domain name that will be used. 
------------------------------------------------------------- 

  4. Press ‘Enter’ to apply the password at the group level when prompted for the administrative password.

    Missing setting: platform/admin.password

Where would you like to update this setting? 
> As a default at group level 
  For each instance in the group 
  Skip this setting for now 

  5. Enter the administrator password (e.g., datacore). The input characters are hidden for the password.

    Missing setting: platform/admin.password

admin.password [type: str ***SECURE***] (Administrative user password): 
 
Please re-enter to confirm: 

  6. Press ‘Enter‘ to apply the user name at the group level when prompted for the administrative user name.

    Missing setting: platform/admin.userName

Where would you like to update this setting? 
> As a default at group level 
  For each instance in the group 
  Skip this setting for now 

  7. Enter the administrator username (e.g., dcadmin). The input characters are hidden for the administrator username.

    Missing setting: platform/admin.userName 

admin.userName [type: str ***SECURE***] (Administrative user name): 

Please re-enter to confirm: 
 
Authentication state may have changed in the API! 
Please log in, then re-run this command to resume: 
  > scsctl auth login --user "{administrative user name}" 
  > scsctl diagnostics config scan_missing 

  8. At this point the SCS API is locked and all requests must be authenticated. Log in to SCS CLI via scsctl auth login --user [administrative user name]. The below example uses the sample administrative user name from above. The input characters are hidden.

    [root@zorc Platform]# scsctl auth login --user dcadmin 
Enter password for user "dcadmin": 

Logged in 

  9. Continue finalizing configuration settings via scsctl diagnostics config scan_missing command once logged in.

    ====================================================================================================== 
Component: network_boot 
---------------------------------------------- 
Name: network.dnsServers 
Type: array[str] 
Description: Required. DNS servers to be used. 
---------------------------------------------- 

Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP] 
all settings defined for group
======================================================================================================

Component: platform 
------------------------------------------------------------------------------------------------------ 
Name: admin.password 
Type: str
Description: Administrative user password 
------------------------------------------------------------------------------------------------------ 
Name: admin.userName 
Type: str 
Description: Administrative user name 
------------------------------------------------------------------------------------------------------ 
Name: logging.syslogHost 
Type: str 
Description: If defined, then the host that component instances should use for syslog logging. 
------------------------------------------------------------------------------------------------------ 
Name: network.dnsDomain 
Type: str 
Description: Required. The DNS domain name that will be used.
------------------------------------------------------------------------------------------------------ 
Name: network.ntpServers 
Type: array[str] 
Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network.
------------------------------------------------------------------------------------------------------ 

Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP] 

Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!

If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.

  10. Press ‘Enter‘ to apply it at the group level when prompted for the DNS domain.

    ------------------------------------------------------------- 
Name: network.dnsDomain 
Type: str 
Description: Required. The DNS domain name that will be used. 
------------------------------------------------------------- 
Missing setting: platform/network.dnsDomain

Where would you like to update this setting? 
> As a default at group level 
  For each instance in the group 
  Skip this setting for now

  11. Set the DNS domain.

    ------------------------------------------------------------- 
Name: network.dnsDomain 
Type: str 
Description: Required. The DNS domain name that will be used. 
------------------------------------------------------------- 
Missing setting: platform/network.dnsDomain 

 network.dnsDomain [type: str] (Required. The DNS domain name that will be used.): 
 datacore.internal
======================================================================================================

Component: storage 
------------------------------------------------------------------------------------------------------ 
Name: disk.encryptionKeyPrimary 
Type: str 
Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. 
------------------------------------------------------------------------------------------------------ 
Name: disk.encryptionKeys 
Type: dict[str,str] 
Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
------------------------------------------------------------------------------------------------------ 
Name: support.proxyPassword 
Type: str 
Description: Proxy authentication password 
------------------------------------------------------------------------------------------------------ 

Component Group: storage/objstor.scs-lab1.datacore.internal [DEFAULT GROUP]
Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 

If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
------------------------------------------------------------------------------------------------------ 
Name: disk.encryptionKeyPrimary 
Type: str 
Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True.
------------------------------------------------------------------------------------------------------ 
Name: disk.encryptionKeys 
Type: dict[str,str] 
Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
------------------------------------------------------------------------------------------------------ 
Name: support.proxyPassword 
Type: str 
Description: Proxy authentication password 
------------------------------------------------------------------------------------------------------

  12. Select Skip this setting for now and press ‘Enter‘.

    Missing setting: storage/disk.encryptionKeyPrimary

Where would you like to update this setting?
  As a default at group level
  For each instance in the group
> Skip this setting for now

  13. The support proxy password applies if an HTTP proxy is needed for automatic health report submission. Select As a default at group level now and press ‘Enter‘.

    Missing setting: storage/support.proxyPassword

Where would you like to update this setting?
> As a default at group level
  For each instance in the group
  Skip this setting for now

  14. Enter Proxy Password (e.g., datacore). The input characters are hidden for the password.

    Missing setting: storage/support.proxyPassword

support.proxyPassword [type: str ***SECURE***] (Proxy authentication password):
 
Please re-enter to confirm:

Next, configure DHCP.

  • No labels

© DataCore Software Corporation. · https://www.datacore.com · All rights reserved.