[DRAFT] Install Gateway

Continue on the same installer to install the Gateway.

1. Click Install Gateway.

2. On the Gateway Summary page, the number of nodes, CPU cores, and Memory per node, are prefilled based on the YAML file uploaded earlier. These details are editable so a customer can update them if required.

3. Click Add to add a host node.

4. Provide the Vmware host details including:

   1. DataCenter & DataStore - Enter the datacenter and datastore name of the vCenter host.

   2. ESX Host FQDN - Enter the ESX hostname of the vCenter.

   3. Access Network - Private network

   4. Storage Network - Public network

5. Provide the Gateway information including:

   1. Enter the hostname and domain name for Gateway.

   2. Select an access IP as static or DHCP.

      1. For a static IP address, provide the access IP with a network mass subnet and network gateway IP address. Add the number of DNS servers required.

      2. For DHCP, an IP address is assigned by the SCS.

6. Click Add. It adds the host node on the Gateway. Repeat steps 2 to 6 to add more host nodes.

7. Click Next to add the authentication method.

8. Select an authentication method as per the authentication type configured on the customer’s VM. The drop-down contains LDAP, Active Directory, SAML, or PAM methods.

9. Click Next.

10. As per the authentication method configured, define an authentication policy with the root user allowed to the SCS application. Select a username and group name of the selected authentication method server.

11. Click Install. It installs the gateway and launches VM.