Install Gateway for SCS 1.2

Continue on the same installer to install the Gateway.

1. Click Install Gateway.

2. On the Gateway Summary page, the number of nodes, CPU cores, and Memory per node, are prefilled based on the YAML file uploaded earlier. These details are editable so a customer can update them if required.

   Open

   

3. Click Next.

4. Click Add to add a host node.

5. Provide the VMware host details.

   Open

   

   1. DataCenter - Enter the data center name.

   2. DataStore - Enter the datastore name.

   3. ESX Host FQDN - Enter the ESX hostname of the vCenter.

   4. Access Network - Public network

   5. Storage Network - Private network

6. Provide the Gateway information.

   1. Enter the hostname and domain name for Gateway.

   2. Select either Static or DHCP for the storage IP.

      1. If static IP is selected, provide the IP address and network mask.

7. Click Add. It adds the host node on the Gateway. Repeat steps 2 to 6 to add more host nodes.

8. Click Next to add the authentication method.

9. Select an authentication method as per the authentication type configured on the customer’s VM. The drop-down contains LDAP, Active Directory, SAML, or PAM methods.

10. Click Next.

11. As per the authentication method configured, define a root-level policy allowed for the Swarm cluster.

12. Provide the list of users and/or groups allowed to access the cluster.

13. Click Install. It installs the gateway and launches VM.