Skip to end of banner Go to start of banner

[DRAFT] Initialize Additional Gateways

Skip to end of metadata

Created by Anjali Tyagi, last modified by Brian Guetzlaff on Feb 09, 2022

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Initialize on 1^st gateway

To initialize Swarm cluster on 1st Cloud gateway, refer to the following steps:

Swarm gateway is initialized only on the first gateway; for all sesequent gateways, initialization is not required.

Run /opt/caringo/cloudgateway/bin/initgateway to initialize Swarm cluster on 1st gateway and to create an administrative domain e.g., adminDomain = Lab1GatewayAdminDomain.
Start Cloud gateway and ensure that the gateway service running on the system boot.
```
systemctl start cloudgateway 
systemctl enable cloudgateway 
```

Setup 2^nd or other gateways

Repeat install cloud gateway by referring to steps 1 to 13.

Copy configure files from 1^st node before starting gateway services.

scp root@172.16.33.17:/etc/caringo/cloudgateway/gateway.cfg /etc/caringo/cloudgateway/gateway.cfg  
scp root@172.16.33.17:/etc/caringo/cloudgateway/idsys.json /etc/caringo/cloudgateway/idsys.json 
scp root@172.16.33.17:/etc/caringo/cloudgateway/policy.json /etc/caringo/cloudgateway/policy.json

Start gateway services and then ensure that they are running on the system boot.
```
systemctl start cloudgateway 
systemctl enable cloudgateway
```

No labels

© DataCore Software Corporation. · https://www.datacore.com · All rights reserved.