Setup Additional Gateways

Mandatory to Initialize the First Gateway

It is assumed that the first gateway has been fully configured and initialized. Refer to Swarm Gateway | Cluster Initialization and then set additional gateways using the below steps if not:

Repeat Swarm Gateway | Install Swarm Gateway on the additional machines by referring to steps 1 to 13.
Copy configure files from 1^st Gateway before starting gateway services.
scp root@172.16.33.17:/etc/caringo/cloudgateway/gateway.cfg /etc/caringo/cloudgateway/gateway.cfg scp root@172.16.33.17:/etc/caringo/cloudgateway/idsys.json /etc/caringo/cloudgateway/idsys.json scp root@172.16.33.17:/etc/caringo/cloudgateway/policy.json /etc/caringo/cloudgateway/policy.json
Start gateway services and verify they are running on the system boot.
systemctl start cloudgateway systemctl enable cloudgateway

Info

No further gateway initialization is needed for these additional Gateway instances.

Next, Install Swarm Storage Management UI .