Page Comparison

...

• Swarm 10 Performance — With Storage 10.1, the performance both for writes and for erasure-coded object reads is improved for Swarm 10's density-friendly single-IP architecture, the result of optimizations in how Swarm nodes write to volumes under the new design. (SWAR-8357) 

• Memory Handling — Swarm has improved memory handling, especially with bursts and high loads, and 503 Service Unavailable responses are less likely. (SWAR-8335)

• Hardware Diagnostics — This release includes a preview of the Prometheus Node Exporter, for monitoring and diagnostics on the machines in the Swarm cluster. Prometheus is an open-source systems monitoring and alerting toolkit. It allows viewing of statistics available for the system, even under failure conditions. Prometheus scrapes metrics from instrumented jobs, running rules over this data to record aggregated time series or to generate alerts. Grafana and other API consumers can allow visualizing the collected data. The new setting  metrics.enableNodeExporter enables Swarm to run the Prometheus node exporter on port 9100. As a preview, the settings and implementation are subject to change; for more about this preview, contact DataCore Support. (SWAR-8170)

• Bulk Reformatting — Retiring volumes in order to implement encryption at rest requires you to then reformat and remount reformatting and remounting the volumes. Contact DataCore Support for a utility to streamline this process. (SWAR-8088)

• ES Cluster Configuration — The automation script for configuring Elasticsearch for Swarm generates the complete set of unique configuration files for each node in the Elasticsearch cluster. (SWAR-8028)

...

• OSS Updates — Storage 10.0 includes updates to third-party components. See Third-Party Components for 10.0 for the complete listing of packages and versions.

• SCSP Errors — Several new error tokens and error improvements have been are added for this release. See Error Response Headers.

• Blocked Feeds

  • Swarm can now detect the disappearance of the Elasticsearch index associated with a feed and mark the feed as Blocked; such feeds may need to be deleted and recreated. (SWAR-6885)

  • Blocked feeds are retried every 20 minutes, but changing the definition for a blocked feed now triggers an immediate attempt with the new definition, which might may clear the blockage. (SWAR-8232)

  • The handling and reporting of feeds blocked due to internal software issues is improved. (SWAR-8267)

• Fixed

  • The correct behavior for the network.ntpControlKey setting was restored. (SWAR-8371)

  • After an upgrade to version 10.0, the Chassis Details in the Swarm UI did not update the node listings correctly for a period of time. (SWAR-8352)

  • When SwarmFS was not in use, clicking on the NFS settings link in the Storage UI resulted in an error. (SWAR-8350)

  • The correct behavior for the drive disk light toggle in the Swarm UI was is restored. (SWAR-8336)

  • The SNMP MIB entries for the largest stream (volLargestStreamMB and volLargestStreamUUID) are not populated. (SWAR-8331)

  • Rapid updates of objects written with replicate=immediate might may result in some replicas not being found temporarily. (SWAR-8249)

  • Deletes of unnamed objects did not update the Elasticsearch index, leaving a stale entry. (SWAR-8218)

  • Deletes not processed by a feed within two weeks are not propagated to the feed's destination (Elasticsearch or the replication target). (SWAR-7950)

...

...

• During a rolling reboot of a small cluster, erroneous CRITICAL errors may appear on the console, claiming EC objects have insufficient protection. These errors may be disregarded. (SWAR-8421)

• The rate at which nodes retire is slower in Swarm 10.x than 9.6. (SWAR-8386)

• When restarting a cluster of UEFI-booted (versus legacy BIOS) virtual machines, the chassis shut down but do not come back up. (SWAR-8054)

• If you wipe your the Elasticsearch cluster is wiped, the Storage UI will show shows no NFS config. Contact Contract DataCore Support for help repopulating your the SwarmFS config information. (SWAR-8007)

• If you delete a bucket is deleted, any incomplete multipart upload into the bucket leaves the parts (unnamed streams) in the domain. To find and delete them, use the s3cmd utility (search the Support site for "s3cmd" for guidance). (SWAR-7690)

• Dell DX hardware will have has less chassis-level monitoring information available via using SNMP. If this is a concern, contact contract DataCore Support. (SWAR-7606)

• Logs showed the error "FEEDS WARNING: calcFeedInfo(etag=xxx) couldn't find domain xxx, which is needed for a domains-specific replication feed". The root cause is fixed; if you received such warnings are received, contact DataCore Support so the issue can be resolved. (SWAR-7556)

• With multipath-enabled hardware, the Swarm console Disk Volume Menu may erroneously show too many disks, having multiplied the actual disks in use by the number of possible paths to them. (SWAR-7248)

...

1. Download the correct bundle for your the site. Swarm distributions bundle together the core components needed for implementation and later updates; the latest versions are available in the Downloads section on the DataCore Support Portal. 
   Two bundles are available:

   • Platform CSN 8.3 Full Install or Update (for CSN environments) — Flat structure for scripted install/update on a CSN (see CSN Upgrades).

   • Swarm 10 Software Bundle (Platform 9.x and custom environments) — Contains complete updates of all core components, organized hierarchically by component.

     Info
     title Note
     Contact Support for new installs of Platform Server and for optional Swarm client components, such as SwarmFS Implementation, that have separate distributions.

2. Download the comprehensive PDF of Swarm Documentation matching the bundle distribution date, or use the online HTML version from the Documentation Archive.

3. Choose the type of upgrade. Swarm supports rolling upgrades (a single cluster running mixed versions during the upgrade process) and requires no data conversion unless specifically noted for a particular release. Upgrades can be performed without scheduling an outage or bringing down the cluster. Restart the nodes one at a time with the new version and the cluster continues serving applications during the upgrade process.

   • Rolling upgrade: Reboot one node at a time and wait for its status to show as "OK" in the UI before rebooting the next node.

   • Alternative: Reboot the entire cluster at once after the software on all USB flash drives or the centralized configuration location has been is updated.

4. Choose whether to upgrade Elasticsearch 2.3.3 at this time. 

   • To upgrade to Elasticsearch 5.6 with an existing cluster, reindex Search data and migrate any Metrics data to be kept. See Migrating from Older Elasticsearch for details. (SWAR-7395) 

5. Note these installation issues:

   • The elasticsearch-curator package may show an error during an upgrade, which is a known curator issue. Workaround: Reinstall the curator: (SWAR-7439)

     Code Block
     yum reinstall elasticsearch-curator

     (SWAR-7439)

   • Do not install the Swarm Search RPM before installing Java. If Gateway startup fails with "Caringo script plugin is missing from indexer nodes", uninstall and reinstall the Swarm Search RPM. (SWAR-7688)

   • During a rolling upgrade from 9.0.x–9.2.x, you may see intermittent "WriterMissingRemoteMD5 error token" errors may be seen from a client write operation through the Gateway or on writes with gencontentmd5 (or the equivalent). To prevent this, set autoRepOnWrite=0 during the upgrade and restore autoRepOnWrite=1 after it completes. (SWAR-7756)

6. Review the Application and Configuration Guidance.