Page Comparison

On the Elasticsearch Summary page, hardware specifications are prefilled as per data uploaded using the YAML file. These prefilled hardware specifications (number of nodes, CPU cors per node, and memory per node) are editable so the customer can update values as required and click Next to proceed.Hosts are also referred to as storage nodes and can be used interchangeably.

Image Added

Add one or multiple hosts (storage Elasticsearch nodes ) as required, using Add button. Hosts are added one by one. (Any limitation on adding nodes like minimum 1 and maximum ?).

Provide the vCenter host information including:.

Image Added

1. DataCenter & - Enter the data center name.

2. DataStore - Enter the datacenter and datastore name of the vCenter host.

3. ESX Host FQDN - Enter the ESX hostname of the vCenter.

4. Management Network - Private Public network

5. Storage Network - Public Private network

Provide the below Elasticsearch information for installation:.

Image Added

1. Enter the hostname, domain name, and private management IP of Elasticsearch.

2. If the private management IP is static:

   1. Provide private management network IP with network mass subnet and network gateway IP address.

   2. Add the number of DNS servers required.

Select the storage IP as static or DHCP.

1. If static IP is selected, provide an IP address and network mask.

Click Next Add. It adds an Elasticsearch hostname information. The hostname information is editable so a customer can update it if required or can delete it if not required anymore.

Image Added

Click Install to initiate installing Elasticsearch. Wait for a few seconds to install Elasticsearch on the VM.Elasticsearch installation to complete.

Image Added