Versions Compared

Old Version 13

changes.mady.by.user Kyle Miller

Saved on

compared with

New Version Current

changes.mady.by.user Bala Harish A(AC)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note

Mandatory to

...

Initialize the First Gateway

It is assumed that the first gateway has been fully configured and initialized. Refer to

...

https://perifery.atlassian.net/wiki/spaces/public/pages/2919006213/Swarm+Gateway#Cluster-Initialization and then set additional gateways using the below steps if not:

  1. Repeat

...

  1. https://perifery.atlassian.net/wiki/spaces/public/pages/2919006213/Swarm+Gateway#Install-Swarm-Gateway on the additional machines by referring to steps 1 to 13.

  2. Copy configure files from 1st Gateway before starting gateway services.

    Code Block
    languagebash
    scp root@172.16.33.17:/etc/caringo/cloudgateway/gateway.cfg /etc/caringo/cloudgateway/gateway.cfg 
scp root@172.16.33.17:/etc/caringo/cloudgateway/idsys.json /etc/caringo/cloudgateway/idsys.json
scp root@172.16.33.17:/etc/caringo/cloudgateway/policy.json /etc/caringo/cloudgateway/policy.json

  3. Start gateway services and verify they are running on the system boot.

    Code Block
    languagebash
    systemctl start cloudgateway
systemctl enable cloudgateway
Info

Info

No further gateway initialization is needed for these additional Gateway instances.

Tip

Next, install Swarm storage UI Install Swarm Storage Management UI .