Versions Compared

Old Version 11

changes.mady.by.user Anjali Tyagi

Saved on

compared with

New Version 12

changes.mady.by.user Bala Harish A(AC)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

Define Hardware Specification

The YAML file contains hardware specifications and is created using the environment called Swarm Configurator. Please see See Swarm Configurator Instructions for more details about each component used in the configurator tool.
To jump straight to the Swarm Configurator, please go to the Swarm Configurator Tool.

  1. Upload the YAML file exported from Swarm Configurator.

  2. Click Next. The uploaded file displays the hardware specifications that are editable.

  3. Click Edit to update any hardware specification if needed. Click Save to save the updated details.

  4. Click Next.

Power on Storage Nodes

Info

...

Important

Verify the storage nodes are powered on and booting over PXE before proceeding.

  1. If the storage nodes are not powered on yet, Swarm Installer displays a wizard to power them on. Click Ok to proceed and power on storage nodes.

  2. Swarm Installer waits for storage nodes to power on. Once done, details like IP address, hostname, CPU, memory, and maximum storage capacity in TB are displayed for each powered-on storage node. Minimum 3 nodes must be set up and connected to the network to configure the Swarm cluster.

  3. Click Install Elasticsearch to continue.

Tip

Next, see Install Elasticsearch for SCI.