Page Comparison

Refer to the following steps to install SCS RPM with Internet access:

1. Install the EPEL release.

   1. Download the latest EPEL package.

      Code Block
      curl -O https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

   2. Install the downloaded RPM.

      Code Block
      yum install epel-release-latest-7.noarch.rpm

2. If running Red Hat, enable the server extras repository.

   Code Block
   subscription-manager repos --enable=rhel-7-server-extras-rpms

3. Copy '/root/datacore/Swarm-v14.1/SCS/podman_packages.tar’ and place it into the folder ‘/root/datacore’.

4. Extract the file podman_packages.tar (NOTE: containers-common-1-19.el7.28.1.noarch.rpm must be added to the podman packages shown below!!!)

   Code Block
   [root@zorc1 datacore]# tar xvvf podman_packages.tar

5. Code Block

   drwxr-xr-x root/root 0 2022-05-31 05:27 podman_packages/ -rw-r--r-- root/root 22009328 2022-05-31 05:25 podman_packages/podman-3.0.1-2.el7.3.1.x86_64.rpm -rw-r--r-- root/root 2572172 2022-05-31 05:25 podman_packages/podman-plugins-3.0.1-2.el7.3.1.x86_64.rpm -rw-r--r-- root/root 339264 2022-05-31 05:26 podman_packages/catatonit-0.1.5-1.el7.6.1.x86_64.rpm -rw-r--r-- root/root 40400 2022-05-31 05:26 podman_packages/conmon-2.1.0-2.3.1.x86_64.rpm -rw-r--r-- root/root 37888444 2022-05-31 05:26 podman_packages/containernetworking-plugins-1.1.1-1.el7.2.1.x86_64.rpm -rw-r--r-- root/root 89680 2022-05-31 05:26 podman_packages/containernetworking-plugins-unit-test-devel-1.1.1-1.el7.2.1.x86_64.rpm -rw-r--r-- root/root 16927216 2022-05-31 05:26 podman_packages/cri-tools-1.21.0-.el7.3.3.x86_64.rpm -rw-r--r-- root/root 69676 2022-05-31 05:26 podman_packages/fuse-overlayfs-1.5.0-1.el7.5.1.x86_64.rpm -rw-r--r-- root/root 5836152 2022-05-31 05:26 podman_packages/runc-1.0.1-1.el7.1.1.x86_64.rpm -rw-r--r-- root/root 12610384 2022-05-31 05:26 podman_packages/skopeo-1.4.1-1.el7.3.1.x86_64.rpm -rw-r--r-- root/root 56404 2022-05-31 05:26 podman_packages/skopeo-tests-1.4.1-1.el7.3.1.x86_64.rpm drwxr-xr-x root/root 0 2022-05-31 05:27 podman_packages/repodata/ -rw-r--r-- root/root 4730 2022-05-31 05:27 podman_packages/repodata/2ada7f5ac7099e31c79b90ad90adc0efa13c5f6101a44fbfd06f27ed17548324-other.sqlite.bz2 -rw-r--r-- root/root 2759 2022-05-31 05:27 podman_packages/repodata/fc8d49da48cff8a2f5b1815353f283992f50c787240ff795f8cb86195d5ab88f-other.xml.gz -rw-r--r-- root/root 6341 2022-05-31 05:27 podman_packages/repodata/fa7e866b76f379c77b785878811b3edf546576d0b6ea650300c98efce99c0d3a-filelists.sqlite.bz2 -rw-r--r-- root/root 3302 2022-05-31 05:27 podman_packages/repodata/8784e815f651b512ad3b490ee947454f63e366ebcb498e024651f05ec06d8bb2-filelists.xml.gz -rw-r--r-- root/root 14938 2022-05-31 05:27 podman_packages/repodata/832aacbe4e539b0f3a20cfae379be8f8e85ca3521eb211644dcf5a807c9d982b-primary.sqlite.bz2 -rw-r--r-- root/root 7731 2022-05-31 05:27 podman_packages/repodata/fd8a765aedf92cb89ad10e785f49828883adde45b23774fe07bd56550c1ba0b0-primary.xml.gz -rw-r--r-- root/root 2976 2022-05-31 05:27 podman_packages/repodata/repomd.xml

   Note:
   This creates a folder “podman_packages” in the /root/datacore folder.

6. Add a new local repo with '/etc/yum.repos.d/podman.repo' path shown as below:

   Code Block
   [podman] name=Dependencies for install podman 3.0.1 baseurl=file:///root/datacore/podman_packages enabled=true gpgcheck=0

7. Enable the local repo on:

   • CentOS (no additional steps are required, this shows the repo as enabled)

     Code Block
     yum repolist enabled

   • Red Hat

     Code Block
     yum install -y yum-utils yum-config-manager enable podman.repo yum repolist enabled

8. Verify podman is listed as an enabled repo.

9. Install SCS build.

   Code Block
   yum -y install swarm-scs-1.1.0-1.x86_64.rpm

10. Check the scsctl help command to verify the SCS is installed.

    Code Block
    language bash
    usage: scsctl [-v | --info-log | --debug-log | --trace-log] [--user USER | --token TOKEN] options: ... Provides basic control and visibility into the Platform service. optional arguments: --user USER User name and (optionally) password. If password is included, then this must be in the form "{user_name}:{password}" (default: None) --token TOKEN Authentication token. (default: None) output options: These options affect the way output is displayed. -v, --verbose Increase output verbosity (ex: -v, -vv, -vvv). Verbose output is always sent to stdout. (default: None) --info-log Set info-level verbosity (equivalent to -v). (default: None) --debug-log Set debug-level verbosity (equivalent to -vv). (default: None) --trace-log Set trace-level verbosity (equivalent to -vvv). (default: None) subcommands: Which action you wish to perform. To get detailed help, add 'help' to the end. For example: 'scsctl auth help' options: auth Manages persisted credentials for contacting the Platform API. backup Manages backing up and restoring the Platform service. diagnostics Performs diagnostics on the Platform server setup. init Utilities for setting up a Swarm environment. license Manages the license for this Swarm ecosystem installation. repo Manages the Platform repository. The repository contains installed component versions and other third-party software. system Performs administrative operations on the system. help Outputs this help and exits. ERROR: Cannot connect to the Platform API service at 172.16.33.10:8095. Please ensure the service is up and running.

...