Info |
---|
NoteMultipart Write was previously referred to as Parallel Write; the functionality is the same. |
With Multipart Write, you can upload parts Parts of a large object from multiple clients at the same time can be uploaded with Multipart Write. Multipart Write allow client applications to split a large file into in to multiple pieces, transfer the pieces concurrently to Swarm, and then request that Swarm combine the separately uploaded parts together as a single object, thereby minimizing the upload time.
Multipart write requires erasure coding (EC). The health processor (HP) has the ability to consolidate the segments of erasure-coded objects that have with sub-optimal segment usage, such as can happen when you do performing SCSP or S3 multipart writes of objects using small parts. We recommend DataCore recommends configuring clients to use 50MB-100MB parts. To enable consolidation, set Set the configuration setting, ec.segmentConsolidationFrequency, to 10 (recommended), which performs all consolidations over 20 HP cycles , if consolidation is needed.
Info |
---|
TipEvery multipart write must be erasure-coded for upload; however, the HP converts it to a replicated object if the uploaded object does not meet the current policy for EC encoding, the HP converts it to a replicated object. To . Add a lifepoint to that effect to maintain erasure coding for the lifetime of the object, add a lifepoint to that effect. |
...
. |
Three distinct actions must be performed in this order to upload a large object in parts using multipart write, you must perform three distinct actions in this order:
Initiate a multipart write.
Upload or copy the parts.
Complete or cancel the procedure.
...