Page Comparison

Initialize on 1^st gateway

To initialize Swarm cluster on 1st Cloud gateway, refer to the following steps:

...

1. Run /opt/caringo/cloudgateway/bin/initgateway to initialize Swarm cluster on 1st gateway and to create an administrative domain e.g., adminDomain = Lab1GatewayAdminDomain.

2. Start Cloud gateway and ensure that the gateway service running on the system boot.

   Code Block
   language bash
   systemctl start cloudgateway  systemctl enable cloudgateway

Setup 2^nd or other gateways 

1. Repeat install cloud gateway by referring to steps 1 to 13.

2. Copy configure files from 1^st node before starting gateway services.

   Code Block
   language bash
   scp root@172.16.33.17:/etc/caringo/cloudgateway/gateway.cfg /etc/caringo/cloudgateway/gateway.cfg   scp root@172.16.33.17:/etc/caringo/cloudgateway/idsys.json /etc/caringo/cloudgateway/idsys.json  scp root@172.16.33.17:/etc/caringo/cloudgateway/policy.json /etc/caringo/cloudgateway/policy.json

3. Start gateway services and then ensure that they are running on the system boot.

   Code Block
   language bash
   systemctl start cloudgateway  systemctl enable cloudgateway

...