Page Comparison

After getting the Swarm license, the platform is ready to boot storage nodes. Power on the chassis to begin running the Swarm storage service.

Create Virtual Storage Node on VMware ESXi

Refer to the following steps:

1. Login to ESXi 7 Admin WebUI.

2. Click Create/Register VM.

3. Select Create a new virtual machine and click Next.

   Image Removed

4. Enter the name and guest OS of the virtual node.

   Image Removed

   • Name - Swarm Storage Node 01

   • Guest OS family - Linux

   • Guest OS version - Debian GNU/Linux 10 (64bit)

5. Click Next. 

6. Select the appropriate storage and click Next. 

7. Under Customize settings, select minimum hardware requirements:

   Image Removed

   • CPU - 2 cores

   • Memory - 4GB

   • HD - 16GB 

8. Click Next.
   It displays a preview of settings configured:

   Image Removed

9. Click Edit to modify any virtual storage node configuration if required. Once changes are done, save the configuration and click Finish.

10. If there is nothing to be changed for virtual storage node configurations, click Finish to finalize configurations.

11. Select VM Options and expand Advanced from the left panel.

    Image Removed

12. Click Edit Configuration.

    Image Removed

     

13. To add new configuration parameters, click the +Add parameter and ensure that the disk.EnableUUID key must have a value TRUE. If yes, click OK, else change it to TRUE.
    

    Image Removed

14. Click Save. It creates a new virtual storage node.

...

.

Once all four virtual storage nodes are created, you need to power on all of them one by one and SCS will assign an IP address to those storage nodes in sequence.

...