Versions Compared

Old Version 1

changes.mady.by.user Anjali Tyagi

Saved on

compared with

New Version 2

changes.mady.by.user Anjali Tyagi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents

...

To initialize Swarm cluster on 1st Cloud gateway, refer to te the following steps:

Info

Swarm gateway is initialized only on the first gateway; for all sesequent gateways, initialization is not required.

  1. Run /opt/caringo/cloudgateway/bin/initgateway to initialize Swarm cluster on 1st gateway and to create an administrative domain e.g., adminDomain = hkLab1GatewayAdminDomain. 

  2. Start Cloud gateway and ensure that the gateway service running on the system boot.

    Code Block
    systemctl start cloudgateway 
systemctl enable cloudgateway 

...

  1. Repeat install cloud gateway. Steps 1 to 13, WebUI on other nodes, copy configure files from 1st node before starting gateway services.

    Code Block
    scp root@172.16.33.17:/etc/caringo/cloudgateway/gateway.cfg /etc/caringo/cloudgateway/gateway.cfg  
scp root@172.16.33.17:/etc/caringo/cloudgateway/idsys.json /etc/caringo/cloudgateway/idsys.json 
scp root@172.16.33.17:/etc/caringo/cloudgateway/policy.json /etc/caringo/cloudgateway/policy.json 

  2. Now, you can start gateway services via systemctl start cloudgateway command. Start gateway services and then ensure that they are running on the system boot.

    Code Block
    systemctl start cloudgateway 
systemctl enable cloudgateway
Child pages (Children Display)

...