Install Telemetry Server

Continue on the same installer to Install the Telemetry.

1. Click Install Telemetry Server.

2. On the Telemetry summary page, the number of nodes and CPU/Memory per node are prefilled based on the YAML file uploaded. These details are editable so a customer can update them if required.

   Open

   

3. Click Next.

4. Click Add to add vCenter host information and Telemetry host nodes.

5. For vCenter host information;

   Open

   

   1. DataCenter - Enter the data center name.

   2. DataStore - Enter the datastore name.

   3. ESX Host FQDN - Enter the ESX hostname.

   4. Management Network - Public network

   5. Storage Network - Private network

   6. Click Next.

6. For Telemetry host nodes;

   1. Provide the hostname and domain name.

   2. Select an access IP as static or DHCP.

      1. For a static IP address;

         1. Provide the access IP with a network mass subnet and network gateway IP address.

         2. Add the number of DNS servers required using Add button.

      2. For DHCP, an IP address is assigned.

   3. Select either Static or DHCP for the storage IP.

      1. If static IP is selected, provide the IP address and network mask.

7. Click Add. It adds the Telemetry host nodes.
   
   

   The Telemetry host information can be modified after uploading using Edit.

8. Click Install to initiate Telemetry Installation.

9. Wait for the Telemetry server installation to complete. When installed, click Finish.

   A success message is displayed saying “congratulations!! Swarm cluster is successfully installed”.