Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 28 Current »

Some Swarm configuration settings are site-specific and related to:

  • DNS Settings - These are required for DHCP configuration.

  • Disk Encryption Settings - These settings are related to “Encryption at Rest” and should be skipped unless specified by DataCore Support. 

Finalize Configuration Settings

Note

Input characters such as encryptionKeys are hidden when configuring Swarm settings. The best practice is to copy and paste inputs from a raw text editor to prevent any transcription or transposition errors. 

  1. Run

    scsctl diagnostics config scan_missing

    ====================================================================================================== 
    Component: network_boot 
    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP] 
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible. 
  2. Click ‘Enter‘ to apply the settings when prompted for the DNS servers.

    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Missing setting: network_boot/network.dnsServers 
    
    Where would you like to update this setting?
    > As a default at group level 
      For each instance in the group 
      Skip this setting for now 
  3. Provide the DNS servers.

    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Missing setting: network_boot/network.dnsServers
     network.dnsServers [type: array[str]] (Required. DNS servers to be used.):
    172.16.33.4,172.16.33.5
    
    ====================================================================================================== 
    Component: platform 
    ------------------------------------------------------------------------------------------------------ 
    Name: admin.password 
    Type: str 
    Description: Administrative user password 
    ------------------------------------------------------------------------------------------------------ 
    Name: admin.userName 
    Type: str 
    Description: Administrative user name 
    ------------------------------------------------------------------------------------------------------ 
    Name: logging.syslogHost 
    Type: str 
    Description: If defined, then the host that component instances should use for syslog logging. 
    ------------------------------------------------------------------------------------------------------ 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------------------------------------------------ 
    Name: network.ntpServers 
    Type: array[str] 
    Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network.
    ------------------------------------------------------------------------------------------------------ 
    Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP] 
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
  4. Click ‘Enter‘ to apply at the group level when prompted for the DNS domain.

    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
    Missing setting: platform/network.dnsDomain
    
    Where would you like to update this setting? 
    > As a default at group level 
      For each instance in the group 
      Skip this setting for now
  5. Set the DNS domain.

    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
    Missing setting: platform/network.dnsDomain 
    
     network.dnsDomain [type: str] (Required. The DNS domain name that will be used.): 
     datacore.internal
    ======================================================================================================
    
    Component: storage 
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeyPrimary 
    Type: str 
    Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. 
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeys 
    Type: dict[str,str] 
    Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
    ------------------------------------------------------------------------------------------------------ 
    Name: support.proxyPassword 
    Type: str 
    Description: Proxy authentication password 
    ------------------------------------------------------------------------------------------------------ 
    
    Component Group: storage/objstor.scs-lab1.datacore.internal [DEFAULT GROUP]
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeyPrimary 
    Type: str 
    Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True.
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeys 
    Type: dict[str,str] 
    Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
    ------------------------------------------------------------------------------------------------------ 
    Name: support.proxyPassword 
    Type: str 
    Description: Proxy authentication password 
    ------------------------------------------------------------------------------------------------------ 

Notes on Administrative User Name

If SCS is being installed with an existing Swarm storage cluster, then care must be taken to ensure that the SCS administrative user name matches the administrative user name within the storage cluster. This must occur before booting any nodes with SCS. To update the administrative user name at this point:

scsctl platform config set -d "admin.userName={existing cluster administrative user name}" --allow-notification-failures

Info

Any time the administrative credentials are updated, you will need to run the following to re-authenticate scsctl with the API server.

scsctl auth login --user [administrative user name]

This command securely prompts the administrative password and authenticates to SCS.

  • No labels