/
Installing and Initializing Swarm Storage

Installing and Initializing Swarm Storage

Owned by Rumena Zlatkova (Deactivated)
Last updated: Dec 05, 2023 by Bala Harish A(AC)
1 min read

This section describes how to set up and configure a storage cluster. To upgrade an existing storage cluster, How to Upgrade Swarm.

For installing Swarm for the first time, the general path depends on the configuration:

CSN

No CSN

CSN

No CSN

  1. Download CSN/Swarm from the Downloads section on the DataCore Support Portal.

  2. Run the CSN bundle script.

  3. Boot the cluster.

  4. For CSN with Gateway, Install Elasticsearch. Then, Install Gateway (with Swarm UI
    and Content UI).

  5. For CSN with no Gateway, have a local Swarm UI on the CSN and run the Service Proxy script.

Legacy Install Only

This is only for legacy installs. For SCS installation, refer to Online SCS Installation.



  1. Download the Swarm bundle from the Downloads section on the DataCore Support Portal

  2. Install Storage (fsimage/kernel
    files via USB key or PXE server).

  3. Boot the cluster.

  4. If using, install Elasticsearch.

  5. If using, install Gateway (with Swarm UI and Content UI).



Related content

Initializing a Storage Cluster
Initializing a Storage Cluster
Swarm Documentation
Read with this
Add the Swarm Storage Component
Add the Swarm Storage Component
Swarm Documentation
More like this
Online SCS Installation
Online SCS Installation
Swarm Documentation
Read with this
Swarm Basic Deployment
Swarm Basic Deployment
Swarm Documentation
More like this
Upgrading to the Latest SCS Version for CentOS 7
Upgrading to the Latest SCS Version for CentOS 7
Swarm Documentation
Read with this
Run the Swarm Cluster Services (SCS) Initialization Wizard
Run the Swarm Cluster Services (SCS) Initialization Wizard
Swarm Documentation
More like this

© DataCore Software Corporation. · https://www.datacore.com · All rights reserved.