CentOS 8 / RHEL 8 / RockyLinux 8 : yum install haproxy
CentOS 7/RHEL 7 follow instructions provided here https://www.linux.org/threads/centos-announce-announcing-release-of-haproxy-1-8-on-centos-7-x86_64.18168/
Note: On CentOS7/RHEL7 the active haproxy.cfg will be in '/etc/opt/rh/rh-haproxy18/haproxy'
Haproxy is already pre-installed on the Swarm Cluster Installer provisioned - and VMware bundle provided Gateway VM
The following configuration steps are needed to configure HAProxy as an SSL offloader for Content Gateway.
Step-by-step guide
Verify Content Gateway is listening on port 8080 for SCSP, 8090 for S3 and 8091 for Service Proxy:
The example below are not the default gateway ports, this is done on purpose to avoid port conflicts.
/etc/caringo/cloudgateway/gateway.cfg [scsp] enabled = true bindAddress = 0.0.0.0 bindPort = 8080 externalHTTPPort = 80 externalHTTPSPort = 443 [s3] enabled = true bindAddress = 0.0.0.0 bindPort = 8090 [cluster_admin] enabled = true bindAddress = 0.0.0.0 bindPort = 8091 externalHTTPSPort = 91
Note: In this example HTTP access to those personalities is provided. The bind address needs to be modified to 127.0.0.1 for all 3 personalities if security hardening is desired and HTTPS needs to be forced.
Setup and install HAProxy. This package is part of the EPEL repository.
HAproxy is pre-installed on the SwarmContentGateway VM and SCI deployed gateway VM’s.
Use the following example configuration for
/etc/haproxy/haproxy.cfgor on CentOS7 with haproxy1.8 /etc/opt/rh/rh-haproxy18-haproxy/haproxy.cfg
global
log 127.0.0.1 local2
chroot /var/lib/haproxy
stats socket /var/lib/haproxy/stats mode 660 level admin
user haproxy
group haproxy
daemon
ca-base /etc/pki/tls/certs
crt-base /etc/pki/tls/private
ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:RSA+AESGCM:RSA+AES:!aNULL:!MD5:!DSS
ssl-default-bind-options no-sslv3
maxconn 2048
tune.ssl.default-dh-param 2048
defaults
log global
mode http
option forwardfor
# Do not use "option http-server-close", it causes S3 PUT incompatibility with some clients including FileFly!
option httplog
option dontlognull
timeout connect 5000
timeout client 50000
# This timeout should always be larger than gateway.cfg's [storage_cluster] indexerSocketTimeout.
timeout server 130000
frontend www-http
bind 0.0.0.0:80
http-request set-header X-Forwarded-Proto http
http-request set-header X-Forwarded-Port 80
default_backend www-backend-scsp
acl iss3 hdr_sub(Authorization) AWS
acl iss3 url_reg [?&](AWSAccessKeyId|X-Amz-Credential)=
use_backend www-backend-s3 if iss3
frontend www-https
bind 0.0.0.0:443 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem
http-request set-header X-Forwarded-Proto https
http-request set-header X-Forwarded-Port 443
default_backend www-backend-scsp
acl iss3 hdr_sub(Authorization) AWS
acl iss3 url_reg [?&](AWSAccessKeyId|X-Amz-Credential)=
use_backend www-backend-s3 if iss3
frontend www-https-svc
bind 0.0.0.0:91 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem
http-request set-header X-Forwarded-Proto https
http-request set-header X-Forwarded-Port 91
default_backend www-backend-svc
backend www-backend-scsp
#redirect scheme https if !{ ssl_fc } <--- Uncomment this line if you want to force HTTPS
server gw1 YOUR_GATEWAY1_IP:8080 check
server gw2 YOUR_GATEWAY2_IP:8080 check
backend www-backend-s3
#redirect scheme https if !{ ssl_fc } <--- Uncomment this line if you want to force HTTPS
server gw1 YOUR_GATEWAY1_IP:8090 check
server gw2 YOUR_GATEWAY2_IP:8090 check
backend www-backend-svc
# This rule rewrites CORS header to add the port number used on frontend
http-request replace-value Access-Control-Allow-Origin (.*) \1:91
#redirect scheme https if !{ ssl_fc } <--- Uncomment this line if you want to force HTTPS
server gw1 YOUR_GATEWAY1_IP:8091 check
server gw2 YOUR_GATEWAY2_IP:8091 check
Start HAProxy:
systemctl restart haproxy
If when restarting HAProxy this error is thrown “Starting frontend www-https-svc: cannot bind socket [0.0.0.0:91]”, either disable SELinux or run this command:
setsebool -P haproxy_connect_any=1
Create a Self-Signed SSL Certificate
First we need to make an openssl.conf file, in this example YOUR_DOMAIN = swarm.example.com
[ req ] prompt = no distinguished_name = server_distinguished_name req_extensions = v3_req default_md = sha256 [ server_distinguished_name ] commonName = *.swarm.example.com stateOrProvinceName = Texas countryName = US emailAddress = admin@example.com organizationName = Example Inc. localityName = Austin [ v3_req ] keyUsage = nonRepudiation, digitalSignature, keyEncipherment extendedKeyUsage = serverAuth subjectAltName = @alt_names [ alt_names ] DNS.1=swarm.example.com DNS.2=*.swarm.example.com
Generate the self-signed CA private key
openssl genrsa -out selfsignCA.key 4096
Generate the self-signed CA root certificate
openssl req -new -x509 -nodes -days 365 -sha256 -key selfsignCA.key -out selfsignCA.crt -subj "/C=US/O=_DEV CA/CN=SelfSigned certificates"
Generate wildcard custom domain private key
openssl genrsa -out YOUR_DOMAIN.key 4096
Generate certificate signing request for your domain
openssl req -new -nodes -key YOUR_DOMAIN.key -config openssl.conf -out YOUR_DOMAIN.csr
Generate the final domain certificate
openssl x509 -req -in YOUR_DOMAIN.csr -CA selfsignCA.crt -CAkey selfsignCA.key -CAcreateserial -out YOUR_DOMAIN.crt -days 365 -sha256 -extfile openssl.conf -extensions v3_req
Generate the certificate pem file.
cat YOUR_DOMAIN.crt YOUR_DOMAIN.key > YOUR_DOMAIN.pem
Place the YOUR_DOMAIN.pem file where you configured it in haproxy.cfg example here put it in /etc/pki/tls/certs
bind 0.0.0.0:443 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem
Copy the selfsignCA.crt to /etc/pki/ca-trust/source/anchors and run update-ca-trust to tell CentOS to trust your self-signed root certificate.
This is an important step for haproxy as by default it is configured to look for trusted certificates in the /etc/pki/tls/certs folder. ( see ca-base parameter )
Restart haproxy to activate the changes.
Now you can copy the selfsignCA.crt file to your clients and follow the browser specific procedures to install and accept it.
The host <contentgatewayIP>:8091 needs to be used in the login page to connect for Swarm UI in the configuration example above.
Replication Feed configuration
The following setting must appear and be set properly in the /etc/caringo/cloudgateway/gateway.cfg file if the content gateway is going to be used as the destination for a remote replication feed:
[scsp] ... allowSwarmAdminIP=172.30
In the example above, replicate "172.30" with the IP addresses (or prefix) of clients sending administrative requests to the gateway.
The most common example is the IP addresses (or prefix) of the nodes in a cluster using a remote replication feed with the gateway as the destination.
Troubleshooting tips
If you occasionally see the error SEC_ERROR_UNKNOWN_ISSUER , verify you don't have lingering old haproxy processes , and kill them manually.
To check if your selfsigned CA certificate is trusted run the following command:
trust list --filter=ca-anchors | grep Self -i -A2 -B4
Example Output you should see:
pkcs11:id=%f4%a2%f6%c6%e4%db%bc%c8%a1%23%83%d3%67%14%7c%51%c1%8d%bd%ba;type=cert
type: certificate
label: SelfSigned certificates
trust: anchor
category: authority
for CentOS7 and haproxy 1.8 by default require additional log settings to see the output in a file, add the following line in /etc/rsyslog.conf after the boot.log
local2.* /var/log/haproxy.log
then run
systemctl restart rsyslog
you should now see haproxy logging in /var/log/haproxy.log