Page Comparison

To support a private subnet for Storage and Elasticsearch nodes, the Platform server needs both public and private network interfaces (like the dual-network CSN) to support a private subnet for Storage and Elasticsearch nodes. With nodes on a private subnet, you must deploy a proxy to provide access to the health report server and other network resources, such as replication feed targets, NTP servers, and DNS. Without An external browser cannot access the Swarm UI without an interface into to that private network, the Swarm UI cannot be accessed by an external browser.

Deploying Service Proxy

If you are not implementing Content Gateway, you need install Install Service Proxy on your the Platform server to support and host your the Swarm UI if not implementing Content Gateway.

1. Request the Service Proxy package from DataCore Support.

2. Transfer the Service Proxy (serviceproxy-VERSION.zip) file to the Platform server.

3. Run the following CLI command:

   Code Block
   language bash
   platform deploy proxy -b PATH·TO·SERVICE·PROXY·ZIP

   The Platform server deploys the Service Proxy locally and completes all of the configuration configurations needed to run it.

4. Query the status of the Service Proxy with the following below CLI command:.

   Code Block
   language bash
   platform status proxy

5. Locate the logs for the Service Proxy at this location on the Platform server:.

   Code Block
   language bash
   /var/log/gateway

6. Log in to the Swarm UI. You can browse Browse to the Platform server and it redirects you to the UI: .

   Code Block
   language bash
   http://PLATFORM·IP http://PLATFORM·IP/_admin/storage

Deploying SCSP Proxy

If you need The process to deploy the SCSP Proxy to the Platform server , follow this processis:

1. Download and transfer the SCSP Proxy to the Platform server.

2. Locate the SCSP Proxy (scspproxy-8.2.1.zip) file transferred to the Platform server.

3. Unzip the file and change the directory into the folder named scspproxy-8.2.1 

4. Run the following command:

   Code Block
   language bash
   sudo apt-get install ./scspproxy.deb

5. Modify the configuration files as appropriate once the installation completes:.

   1. /etc/caringo/scspproxy/hosts.cfg

   2. /etc/caringo/scspproxy/scspproxy.cfg

Controlling the SCSP Proxy

Once the configuration files are modified as necessary, you can start and stop the SCSP Proxy using the following commands:.

sudo systemctl start scspproxy
sudo systemctl stop scspproxy

Removing SCSP Proxy

To Run the below command to uninstall the SCSP Proxy from the Platform server, run the following command.

sudo apt-get purge scspproxy

...

The Platform server configures all Storage chassis to use the Platform server as the default gateway by default. If the Storage chassis reside resides on a private network and need needs to access resources that are outside the private network using a NAT service, you can enable this service on the Platform server as needed.

To allow Allow the Platform Server to provide NAT for a private storage network , do using the following commands:

1. Run the following command:

   Code Block
   language bash
   sudo add_nat -e EXTERNAL·NIC -i STORAGE·NETWORK·NIC sudo add_nat -e eth0 -i eth1

2. After the command completes, reboot the server.

...