Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

...

Symptom

Action

When booting, the node generates an error stating a boot device is unavailable.

The node boots into an operating system other than Swarm.

If booting from a USB device, verify

Verify the node is capable of booting from a USB device and the USB memory device is configured as the primary boot device if booting from a USB device.

Verify the following if PXE booting:

  • The server is configured to network boot.

  • PortFast is configured on the switch ports leading to the Swarm node.

Otherwise, the

  • The extended time delay required for listening and learning Spanning Tree states can prevent netboot from delivering the Swarm image to the node in a timely manner if the above are not satisfied.

The node boots from the USB device/ CSN/ or custom PXE boot server, but Swarm fails to start.

The node begins to boot but reports a "kernel panic" error and stops.

If using a CSN or custom PXE boot server, update the ramdisk size as mentioned at the bottom of this page: https://perifery.atlassian.net/wiki/spaces/public/pages/3298918413/Swarm+Storage+15.3.1+Release%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8B%E2%80%8BACE

These symptoms

usually

could indicate a hardware compatibility issue with the hardware. Contact DataCore Support with the details of the hardware setup.