Versions Compared

Version Old Version 4 New Version Current
Changes made by

Kyle Miller (Deactivated)

Kyle Miller (Deactivated)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

When Platform is running, it augments the Swarm UI with additional pages and capabilities.

Table of Contents

Platform Settings

Primary to the Platform UI is the Platform Settings page. This page supports administration of the Swarm platform, so that you can:

  • View the current Platform configuration

  • Reserve one or more sets of IP ranges

Info

...

Note

...

Safely add or modify a Reserved Range on a live cluster: if the range you set is invalid, Platform server

...

rejects it.

Storage Version — The Platform Settings page allows managing versions of Swarm Storage. You can:

  • Upload a new version of Swarm Storage software (the ZIP file of the storage firmware boot image)

  • See all installed versions

    that have been installed

  • Delete an unneeded version, but not while any chassis is still using it (the chassis must first be changed to a different version and restarted)

  • See how many chassis are currently running each version (a trashcan/delete icon instead of a counter means there are none)

    Image RemovedImage Added

Chassis Settings

The other major area of Platform functionality is the Chassis Details, Settings tab, which allows viewing and controlling all chassis-specific Swarm settings. These are the key reasons to edit settings on a specific machine:

  • Subclusters — Assign this chassis to a subcluster (node.subcluster)

  • Archive — Put this chassis into or out of Archive mode (node.archiveMode)

title
Info

Caution

Many settings available here are for expert usage. Get guidance from Support before changing other values on a particular chassis, such as ones controlling networking or Storage behavior.

...

title
Info

Settings tips

  • Settings in bold highlight values that deviate from the Swarm default.

  • Settings with an icon next to them require a restart to take effect.

    Image RemovedImage Added

For information about a specific Swarm setting, hover over the setting name for a pop-up description.

See the Swarm Storage Settings Reference.

Restarting Hardware

From the Swarm UI, you can perform either an immediate cluster restart or a minimally disruptive rolling restart, in addition to restarting individual machines. (v10.0)

title
Info

Important

With a rolling restart (recommended), the cluster remains in service, with chassis going offline and restarting one at a time. With an immediate cluster-wide restart, the cluster will be is out of service until all of the chassis are back online.

  •  From the Cluster > Hardware page, click the gear icon and select Rolling Restart or Restart All: 

    Image RemovedImage Added

  • To restart only one chassis, first open the Chassis Details, then click the gear icon and select Restart: 

    After Proceed to the next chassis after the chassis comes back online, proceed to the next chassis.