Page Comparison

...

Code Block

global
    log 127.0.0.1 local2
    chroot /var/lib/haproxy
    stats socket /var/lib/haproxy/stats mode 660 level admin
    stats timeout 30s
    user haproxy
    group haproxy
    daemon

    ca-base /etc/pki/tls/certs
    crt-base /etc/pki/tls/private

    ssl-default-bind-ciphers ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:RSA+AESGCM:RSA+AES:!aNULL:!MD5:!DSS
    ssl-default-bind-options no-sslv3
    maxconn 2048
    tune.ssl.default-dh-param 2048

defaults
    log     global
    mode    http
    option  forwardfor
    # Do not use "option  http-server-close", it causes S3 PUT incompatibility with some clients including FileFly!
    option  httplog
    option  dontlognull
    timeout connect 5000
    timeout client  50000
    # This timeout should always be larger than gateway.cfg's [storage_cluster] indexerSocketTimeout
    # and large enough to not timeout an S3 CopyObject or an SCSP COPY in a versioned bucket.
    timeout server  130000

frontend www-http
    bind 0.0.0.0:80
    http-request set-header X-Forwarded-Proto http
    http-request set-header X-Forwarded-Port 80
    default_backend www-backend-scsp
    acl iss3 hdr_sub(Authorization) AWS
    acl iss3 url_reg [?&](AWSAccessKeyId|X-Amz-Credential)=
    use_backend www-backend-s3 if iss3

frontend www-https
    bind 0.0.0.0:443 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem
    http-request set-header X-Forwarded-Proto https
    http-request set-header X-Forwarded-Port 443
    default_backend www-backend-scsp
    acl iss3 hdr_sub(Authorization) AWS
    acl iss3 url_reg [?&](AWSAccessKeyId|X-Amz-Credential)=
    use_backend www-backend-s3 if iss3

frontend www-https-svc
    bind 0.0.0.0:91 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem
    http-request set-header X-Forwarded-Proto https
    http-request set-header X-Forwarded-Port 91
    default_backend www-backend-svc

backend www-backend-scsp
    #redirectbalance schemeleastconn
https if !{ ssl_fc }# On HAPROXY <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8080 check
    server gw2 YOUR_GATEWAY2_IP:8080 check

backend www-backend-s3
    #redirect scheme https if !{ ssl_fc }    <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8090 check
    server gw2 YOUR_GATEWAY2_IP:8080 check

backend www-backend-svc
    # This rule rewrites CORS header to add the port number used on frontend
    http-request replace-value Access-Control-Allow-Origin (.*) \1:91
    #redirect scheme https if !{ ssl_fc } <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8091 check
    server gw2 YOUR_GATEWAY2_IP:8080 check

Start HAProxy:
systemctl restart haproxy

Note

If when restarting HAProxy this error is thrown “Starting frontend www-https-svc: cannot bind socket [0.0.0.0:91]”, either disable SELinux or run this command:

setsebool -P haproxy_connect_any=1

Create a Self-Signed SSL Certificate

A new more modern approach is to make an openssl.conf file first, here is an example:

Code Block

[ req ]
prompt = no
distinguished_name = server_distinguished_name
req_extensions = v3_req
default_md = sha256

[ server_distinguished_name ]
commonName = *.swarm.example.com
stateOrProvinceName = Texas
countryName = US
emailAddress = admin@example.com
organizationName = Example Inc.
localityName = Austin

[ v3_req ]
basicConstraints = CA:FALSE
keyUsage = critical, digitalSignature, keyEncipherment
extendedKeyUsage=critical,serverAuth,clientAuth
subjectAltName = @alt_names

[ alt_names ]
DNS.1=swarm.example.com
DNS.2=*.swarm.example.com

Generate the self-signed CA private key

Code Block
openssl genrsa -out selfsignCA.key 4096

Generate the self-signed CA root certificate

Code Block
openssl req -new -x509 -days 365 -key selfsignCA.key -out selfsignCA.crt -batch

Generate wildcard custom domain certificate

Code Block
openssl genrsa -out YOUR_DOMAIN.key 4096

Generate certificate signing request for your domain

Code Block
openssl req -new -nodes -key YOUR_DOMAIN.key -config openssl.conf -out YOUR_DOMAIN.csr

Generate the final domain certificate

Code Block
openssl x509 -req -in YOUR_DOMAIN.csr -CA selfsignCA.crt -CAkey selfsignCA.key -CAcreateserial -out YOUR_DOMAIN.crt -days 365 -sha256 -extfile openssl.conf -extensions v3_req

Generate the certificate pem file.

Code Block
cat YOUR_DOMAIN.crt YOUR_DOMAIN.key > YOUR_DOMAIN.pem

Place the pem file where you configured it in haproxy.cfg example here put it in /etc/pki/tls/certs

Code Block
bind 0.0.0.0:443 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem

The host <contentgatewayIP>:8091 needs to be used in the login page to connect for Swarm UI in the configuration example above.

Info
Copy your selfsignCA.crt file to `/etc/pki/ca-trust/source/anchors` and run `update-ca-trust` to test the new certificate from a CentOS 7.x client. curl may then used to test the certificate validation once the command completes.

Replication Feed configuration

The following setting must appear and be set properly in the /etc/caringo/cloudgateway/gateway.cfg file if the content gateway is going to be used as the destination for a remote replication feed:

Code Block
[scsp] ... allowSwarmAdminIP=172.30

In the example above, replicate "172.30" with the IP addresses (or prefix) of clients sending administrative requests to the gateway.

...

 2.2
    option httpchk HEAD /_admin/manage/version HTTP/1.1\r\nHost:\ haproxy-healthcheck
    http-check expect status 200
    # On HAPROXY > 2.2
    #option httpchk
    #http-check connect
    #http-check send meth HEAD uri /_admin/manage/version ver HTTP/1.1 hdr Host haproxy-healthcheck
    #http-check expect status 200
  
    #redirect scheme https if !{ ssl_fc }   <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8080 check inter 10s fall 3 rise 2
    server gw2 YOUR_GATEWAY2_IP:8080 check inter 10s fall 3 rise 2

backend www-backend-s3
    balance leastconn
    # On HAPROXY < 2.2
    option httpchk HEAD / HTTP/1.1\r\nHost:\ haproxy-healthcheck
    http-check expect status 403
    # On HAPROXY > 2.2
    #option httpchk
    #http-check connect
    #http-check send meth HEAD uri / ver HTTP/1.1 hdr Host haproxy-healthcheck
    #http-check expect status 403
    
    #redirect scheme https if !{ ssl_fc }    <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8090 check inter 10s fall 3 rise 2
    server gw2 YOUR_GATEWAY2_IP:8090 check inter 10s fall 3 rise 2

backend www-backend-svc
    balance leastconn
    # On HAPROXY < 2.2
    option httpchk HEAD / HTTP/1.1\r\nHost:\ haproxy-healthcheck
    http-check expect status 401
    # On HAPROXY > 2.2
    #option httpchk
    #http-check connect
    #http-check send meth HEAD uri / ver HTTP/1.1 hdr Host haproxy-healthcheck
    #http-check expect status 401
    
    # This rule rewrites CORS header to add the port number used on frontend
    http-request replace-value Access-Control-Allow-Origin (.*) \1:91
    #redirect scheme https if !{ ssl_fc } <--- Uncomment this line if you want to force HTTPS
    server gw1 YOUR_GATEWAY1_IP:8091 check inter 10s fall 3 rise 2
    server gw2 YOUR_GATEWAY2_IP:8091 check inter 10s fall 3 rise 2

Start HAProxy:
systemctl restart haproxy

Note

If when restarting HAProxy this error is thrown “Starting frontend www-https-svc: cannot bind socket [0.0.0.0:91]”, either disable SELinux or run this command:

setsebool -P haproxy_connect_any=1

Loadbalancing healthcheck

If you have 2 or more gateways, it is recommended to use the http-check directives to verify the service is live.

Each protocol requires different healthcheck configuration.

SCSP Protocol

HAPROXY < 2.2

Code Block
option httpchk HEAD /_admin/manage/version HTTP/1.1\r\nHost:\ haproxy-healthcheck http-check expect status 200

HAPROXY > 2.2

Code Block
option httpchk http-check connect http-check send meth HEAD uri /_admin/manage/version ver HTTP/1.1 hdr Host haproxy-healthcheck http-check expect status 200

S3 Protocol

HAPROXY < 2.2

Code Block
option httpchk HEAD / HTTP/1.1\r\nHost:\ haproxy-healthcheck http-check expect status 403

HAPROXY > 2.2

Code Block
option httpchk http-check connect http-check send meth HEAD uri / ver HTTP/1.1 hdr Host haproxy-healthcheck http-check expect status 403

Admin Protocol ( cluster_admin )

HAPROXY < 2.2

Code Block
option httpchk HEAD / HTTP/1.1\r\nHost:\ haproxy-healthcheck http-check expect status 401

HAPROXY > 2.2

Code Block
option httpchk http-check connect http-check send meth HEAD uri / ver HTTP/1.1 hdr Host haproxy-healthcheck http-check expect status 401

Backend section for all protocols

Code Block
server gw1 YOUR_GATEWAY1_IP:8090 check inter 10s fall 3 rise 2 server gw2 YOUR_GATEWAY2_IP:8090 check inter 10s fall 3 rise 2

Example Logging with SCSP health check

In the following example I ran a while loop, to read an object every second… and while doing it shutdown 1 of the 2 gateways waited a few seconds then started it back up.

Code Block

Mar 15 08:01:54 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45870 [15/Mar/2024:08:01:54.044] www-http swarm-scsp/gw1 0/0/0/20/29 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.0|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:01:55 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45876 [15/Mar/2024:08:01:55.095] www-http swarm-scsp/gw2 0/0/0/20/28 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:01:56 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45880 [15/Mar/2024:08:01:56.144] www-http swarm-scsp/gw1 0/0/0/16/22 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.0|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:01:57 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45890 [15/Mar/2024:08:01:57.187] www-http swarm-scsp/gw2 0/0/0/20/29 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"

**** Here I stop gw1 service...  which produces 503's until haproxy detects it

Mar 15 08:02:01 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45894 [15/Mar/2024:08:01:58.236] www-http swarm-scsp/gw1 0/0/-1/-1/3003 503 216 - - SC-- 1/1/0/0/3 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:02 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45908 [15/Mar/2024:08:02:02.260] www-http swarm-scsp/gw2 0/0/0/20/29 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:06 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45914 [15/Mar/2024:08:02:03.310] www-http swarm-scsp/gw1 0/0/-1/-1/3006 503 216 - - SC-- 1/1/0/0/3 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:07 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45928 [15/Mar/2024:08:02:07.338] www-http swarm-scsp/gw2 0/0/0/19/27 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:11 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45932 [15/Mar/2024:08:02:08.387] www-http swarm-scsp/gw1 0/0/-1/-1/3006 503 216 - - SC-- 1/1/0/0/3 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:12 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45946 [15/Mar/2024:08:02:12.415] www-http swarm-scsp/gw2 0/0/0/14/21 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:16 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45954 [15/Mar/2024:08:02:13.456] www-http swarm-scsp/gw1 0/0/-1/-1/3006 503 216 - - SC-- 1/1/0/0/3 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {|} "GET /test14/test2 HTTP/1.1"

**** HAproxy figures out gw1 is down

Mar 15 08:02:16 cert-prod-haproxy haproxy[1411077]: [WARNING]  (1411077) : Server swarm-scsp/gw1 is DOWN, reason: Layer4 connection problem, info: "Connection refused", check duration: 0ms. 1 active and 0 backup servers left. 0 sessions active, 0 requeued, 0 remaining in queue.
Mar 15 08:02:16 cert-prod-haproxy haproxy[1411077]: Server swarm-scsp/gw1 is DOWN, reason: Layer4 connection problem, info: "Connection refused", check duration: 0ms. 1 active and 0 backup servers left. 0 sessions active, 0 requeued, 0 remaining in queue.
Mar 15 08:02:16 cert-prod-haproxy haproxy[1411077]: Server swarm-scsp/gw1 is DOWN, reason: Layer4 connection problem, info: "Connection refused", check duration: 0ms. 1 active and 0 backup servers left. 0 sessions active, 0 requeued, 0 remaining in queue.

**** At this point all calls go to gw2 only

Mar 15 08:02:17 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45968 [15/Mar/2024:08:02:17.483] www-http swarm-scsp/gw2 0/0/0/19/28 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:18 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45974 [15/Mar/2024:08:02:18.532] www-http swarm-scsp/gw2 0/0/0/18/24 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:19 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45978 [15/Mar/2024:08:02:19.577] www-http swarm-scsp/gw2 0/0/0/17/24 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:20 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45984 [15/Mar/2024:08:02:20.623] www-http swarm-scsp/gw2 0/0/0/16/23 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:21 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:45988 [15/Mar/2024:08:02:21.667] www-http swarm-scsp/gw2 0/0/0/16/25 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"

*** Here I start gw1 back up, and Haproxy detects it.

Mar 15 08:02:36 cert-prod-haproxy haproxy[1411077]: [WARNING]  (1411077) : Server swarm-scsp/gw1 is UP, reason: Layer7 check passed, code: 200, check duration: 18ms. 2 active and 0 backup servers online. 0 sessions requeued, 0 total in queue.
Mar 15 08:02:36 cert-prod-haproxy haproxy[1411077]: Server swarm-scsp/gw1 is UP, reason: Layer7 check passed, code: 200, check duration: 18ms. 2 active and 0 backup servers online. 0 sessions requeued, 0 total in queue.
Mar 15 08:02:36 cert-prod-haproxy haproxy[1411077]: Server swarm-scsp/gw1 is UP, reason: Layer7 check passed, code: 200, check duration: 18ms. 2 active and 0 backup servers online. 0 sessions requeued, 0 total in queue.

*** Here we are back using both gateways

Mar 15 08:02:37 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:46086 [15/Mar/2024:08:02:37.293] www-http swarm-scsp/gw2 0/0/0/13/21 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:39 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:46090 [15/Mar/2024:08:02:38.336] www-http swarm-scsp/gw1 0/0/0/894/899 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.0|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:40 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:46100 [15/Mar/2024:08:02:40.256] www-http swarm-scsp/gw2 0/0/0/14/21 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.a|} "GET /test14/test2 HTTP/1.1"
Mar 15 08:02:41 cert-prod-haproxy haproxy[1411077]: 172.30.4.246:46106 [15/Mar/2024:08:02:41.299] www-http swarm-scsp/gw1 0/0/0/18/23 200 1058993 - - ---- 1/1/0/0/0 0/0 {|swarm.certlab.datacore.com|curl/7.29.0|||Basic YWRtaW46ZGF0YWNvcmU=} {CAStor Cluster/16.0.0|} "GET /test14/test2 HTTP/1.1"

Create a Self-Signed SSL Certificate

First we need to make an openssl.conf file, in this example YOUR_DOMAIN = swarm.example.com

Code Block

[ req ]
prompt = no
distinguished_name = server_distinguished_name
req_extensions = v3_req
default_md = sha256

[ server_distinguished_name ]
commonName = *.swarm.example.com
stateOrProvinceName = Texas
countryName = US
emailAddress = admin@example.com
organizationName = Example Inc.
localityName = Austin

[ v3_req ]
keyUsage = nonRepudiation, digitalSignature, keyEncipherment
extendedKeyUsage = serverAuth
subjectAltName = @alt_names

[ alt_names ]
DNS.1=swarm.example.com
DNS.2=*.swarm.example.com

Generate the self-signed CA private key

Code Block
openssl genrsa -out selfsignCA.key 4096

Generate the self-signed CA root certificate

Code Block
openssl req -new -x509 -nodes -days 365 -sha256 -key selfsignCA.key -out selfsignCA.crt -subj "/C=US/O=_DEV CA/CN=SelfSigned certificates"

Generate wildcard custom domain private key

Code Block
openssl genrsa -out YOUR_DOMAIN.key 4096

Generate certificate signing request for your domain

Code Block
openssl req -new -nodes -key YOUR_DOMAIN.key -config openssl.conf -out YOUR_DOMAIN.csr

Generate the final domain certificate

Code Block
openssl x509 -req -in YOUR_DOMAIN.csr -CA selfsignCA.crt -CAkey selfsignCA.key -CAcreateserial -out YOUR_DOMAIN.crt -days 365 -sha256 -extfile openssl.conf -extensions v3_req

Generate the certificate pem file.

Code Block
cat YOUR_DOMAIN.crt YOUR_DOMAIN.key > YOUR_DOMAIN.pem

Place the YOUR_DOMAIN.pem file where you configured it in haproxy.cfg example here put it in /etc/pki/tls/certs

Code Block
bind 0.0.0.0:443 ssl crt /etc/pki/tls/certs/YOUR_DOMAIN.pem

Copy the selfsignCA.crt to /etc/pki/ca-trust/source/anchors and run update-ca-trust to tell CentOS to trust your self-signed root certificate.

Note
This is an important step for haproxy as by default it is configured to look for trusted certificates in the `/etc/pki/tls/certs` folder. ( see ca-base parameter )

Restart haproxy to activate the changes.

Now you can copy the selfsignCA.crt file to your clients and follow the browser specific procedures to install and accept it.

The host <contentgatewayIP>:8091 needs to be used in the login page to connect for Swarm UI in the configuration example above.

Replication Feed configuration

The following setting must appear and be set properly in the /etc/caringo/cloudgateway/gateway.cfg file if the content gateway is going to be used as the destination for a remote replication feed:

Code Block
[scsp] ... allowSwarmAdminIP=172.30

In the example above, replicate "172.30" with the IP addresses (or prefix) of clients sending administrative requests to the gateway.

The most common example is the IP addresses (or prefix) of the nodes in a cluster using a remote replication feed with the gateway as the destination.

Troubleshooting tips

If you occasionally see the error SEC_ERROR_UNKNOWN_ISSUER , verify you don't have lingering old haproxy processes , and kill them manually.

To check if your selfsigned CA certificate is trusted run the following command:

Code Block

trust list --filter=ca-anchors | grep Self -i -A2 -B4

Example Output you should see:
pkcs11:id=%f4%a2%f6%c6%e4%db%bc%c8%a1%23%83%d3%67%14%7c%51%c1%8d%bd%ba;type=cert
    type: certificate
    label: SelfSigned certificates
    trust: anchor
    category: authority

for CentOS7 and haproxy 1.8 by default require additional log settings to see the output in a file, add the following line in /etc/rsyslog.conf after the boot.log

Code Block
local2.* /var/log/haproxy.log

then run

Code Block
systemctl restart rsyslog

you should now see haproxy logging in /var/log/haproxy.log

Do not forget to enable the ports on your firewall

Code Block
firewall-cmd --add-port=443/tcp --permanent firewall-cmd --add-port=80/tcp --permanent firewall-cmd --reload

Info
Keep in mind that normally you have multiple zone’s , since gateway has 2 adapters, the above example only adds the ports to the Default firewall zone

Filter by label (Content by label)

showLabels	false
max	5
spaces	KB
showSpace	false
sort	modified
type	page
reverse	true
labels	ContentGateway devcloud OEM
cql	label in ( "devcloud" , "contentgateway" , "oem" ) and type = "page" and space = "KB"

Page Properties

hidden	true

Related issues

Versions Compared

Old Version 31

New Version Current

Key

Create a Self-Signed SSL Certificate

Replication Feed configuration

Loadbalancing healthcheck

SCSP Protocol

S3 Protocol

Admin Protocol ( cluster_admin )

Backend section for all protocols

Example Logging with SCSP health check

Create a Self-Signed SSL Certificate

Replication Feed configuration

Troubleshooting tips