Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Run

    Code Block
    scsctl diagnostics config scan_missing

    Code Block
    languagebash
    ====================================================================================================== 
    Component: network_boot 
    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP] 
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible. 

  2. Click ‘Enter‘ to apply the settings when prompted for the DNS servers.

    Code Block
    languagebash
    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Missing setting: network_boot/network.dnsServers 
    
    Where would you like to update this setting?
    > As a default at group level 
      For each instance in the group 
      Skip this setting for now 
  3. Provide the DNS servers.

    Code Block
    languagebash
    ---------------------------------------------- 
    Name: network.dnsServers 
    Type: array[str] 
    Description: Required. DNS servers to be used. 
    ---------------------------------------------- 
    Missing setting: network_boot/network.dnsServers
     network.dnsServers [type: array[str]] (Required. DNS servers to be used.):
    172.16.33.4,172.16.33.5
    
    ====================================================================================================== 
    Component: platform 
    ------------------------------------------------------------------------------------------------------ 
    Name: admin.password 
    Type: str 
    Description: Administrative user password 
    ------------------------------------------------------------------------------------------------------ 
    Name: admin.userName 
    Type: str 
    Description: Administrative user name 
    ------------------------------------------------------------------------------------------------------ 
    Name: logging.syslogHost 
    Type: str 
    Description: If defined, then the host that component instances should use for syslog logging. 
    ------------------------------------------------------------------------------------------------------ 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------------------------------------------------ 
    Name: network.ntpServers 
    Type: array[str] 
    Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network.
    ------------------------------------------------------------------------------------------------------ 
    Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP] 
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
  4. Click ‘Enter‘ to apply at the group level when prompted for the DNS domain.

    Code Block
    languagebash
    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
    Missing setting: platform/network.dnsDomain
    
    Where would you like to update this setting? 
    > As a default at group level 
      For each instance in the group 
      Skip this setting for now
  5. Set the DNS domain.

    Code Block
    languagebash
    ------------------------------------------------------------- 
    Name: network.dnsDomain 
    Type: str 
    Description: Required. The DNS domain name that will be used. 
    ------------------------------------------------------------- 
    Missing setting: platform/network.dnsDomain 
    
     network.dnsDomain [type: str] (Required. The DNS domain name that will be used.): 
     datacore.internal
    ======================================================================================================
    
    Component: storage 
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeyPrimary 
    Type: str 
    Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. 
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeys 
    Type: dict[str,str] 
    Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
    ------------------------------------------------------------------------------------------------------ 
    Name: support.proxyPassword 
    Type: str 
    Description: Proxy authentication password 
    ------------------------------------------------------------------------------------------------------ 
    
    Component Group: storage/objstor.scs-lab1.datacore.internal [DEFAULT GROUP]
    Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! 
    
    If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeyPrimary 
    Type: str 
    Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True.
    ------------------------------------------------------------------------------------------------------ 
    Name: disk.encryptionKeys 
    Type: dict[str,str] 
    Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. 
    ------------------------------------------------------------------------------------------------------ 
    Name: support.proxyPassword 
    Type: str 
    Description: Proxy authentication password 
    ------------------------------------------------------------------------------------------------------ 
  6. Select Skip this setting for now and click ‘Enter‘.

    Code Block
    Missing setting: storage/disk.encryptionKeyPrimary
    
    Where would you like to update this setting?
      As a default at group level
      For each instance in the group
    > Skip this setting for now
  7. The support proxy password applies if an HTTP proxy is needed for automatic health report submission. Select As a default at group level now and click ‘Enter‘.

    Code Block
    languagebash
    Missing setting: storage/support.proxyPassword
    
    Where would you like to update this setting?
    > As a default at group level
      For each instance in the group
      Skip this setting for now
  8. Enter the Proxy Password (e.g., datacore). The input characters are hidden for the password.

    Code Block
    Missing setting: storage/support.proxyPassword
    
    support.proxyPassword [type: str ***SECURE***] (Proxy authentication password):
     
    Please re-enter to confirm:

Notes on Administrative User Name

...

Info

Info

Any time the administrative credentials are updated, you will need to run the following to re-authenticate scsctl with the API server.

scsctl auth login --user [administrative user name]

This command securely prompts the administrative password and authenticates to SCS.

Tip

Next, Install Swarm License Configure DHCP.