Page Comparison

Please follow these four simple steps to begin using Perifery Transporter:

In the

...

box

The following items should be are present:

• The Perifery Transporter device

• A License USB key

• A sheet with information about connecting to the device

Step 1: Set up

The whole setup needs three steps:

1. Plugin Plug the License USB key into the Perifery Transporter device.

2. Plug the Transporter device and computer/laptop into the same network switch.

3. Power on the device. Now, the The device will be accessible via the network and will start up. Consult the sheet that came with the device for the URL to enter into your . Enter the same URL into the browser to view the console. For example, the URL is http://frankenporter.local:9010/ui

Boot

The boot process for Perifery Transporter can take a few minutes, depending on the amount of data stored. No user action is required.

...

A confirmation message displays when the boot is complete.

...

Step 2: Login

...

1. Enter the default username and password available on the sheet that came with the device.

   1. Username – periferyadmin

   2. Password – password

2. Click Login.

Step 3: Update your password

This is a one-time update for step is applicable to the first-time login useronly.

1. Enter the new password and re-enter it to confirm.

   

2. Click Update password.
   A confirmation message appears saying that ‘Password updated successfully’.

Step 4: Dashboard

The dashboard screen provides:

...

Status overview

...

The status overview provides – Provides the current state of hardware (CPU, RAM, network, and disks) and transporter Perifery Transporter services.

• - Shows all the hardware/services are working fine.

• ❗ – Shows all the hardware/services are not up and running as expected.

Storage

...

This section provides – Provides the total storage space of the device and how much space has been consumed in a bar format.

How to connect

...

This section is used to copy access URLs and tokens

...

Access URLs and tokens will be used later to perform the Move operation, so save them . Choose either option to copy and save access information in a text document .Choose either option to copyor email:

• Click to copy everything in one go.

• Click to copy one by one.

How to upload content using S3?

Cyberduck is being used for illustrative purposes, but Use any S3 tool to upload content to Perifery Transporter. Here is an example of Cyberduck for illustrative purposes; the same information may be used for any application that uses an S3 connection.

...

Launch Cyberduck and click Open Connection.

...

Choose Amazon S3 from the dropdown list of protocols.

...

Fill in the following fields:

• Server – The hostname of the Perifery S3 endpoint URL.

• Port – A port in the Perifery S3 endpoint URL.

• Access Key ID – The Perifery S3 Access Key.

• Secret Access Key – The Perifery S3 Secret Key.
  Verify that the URL in Cyberduck matches the Perifery S3 Endpoint URL (it is okay if the port is not shown in the Cyberduck URL).

...

Click Connect.

...

For detailed information about how to connect to upload content to S3 using Cyberduck, see https://perifery.atlassian.net/wiki/spaces/DOCS/pages/3132293151/DRAFT+Transporter+User+Guide#How-to-connect.

View Content Portal

...

Go to Advanced > click Manage content. It navigates to the Content Portal to view all the Another way to upload content to the Perifery Transporter is using Content Portal, which provides multiple functionalities to safely store and manage content (bucket, objects, etc.).

Data migration

This section provides a way to move bucket content to a remote S3 destination.

...

Move bucket

To move a bucket, refer to the following steps:

1. Click corresponding to the bucket. It displays a form in the sliding panel.

   Image Removed

2. Fill in the required fields marked with asterisks (*):

   1. S3 endpoint URL – A target S3 endpoint URL.

   2. S3 region – A geographic area of the storage.

   3. S3 bucket – A target S3 bucket where the content is to be moved.

   4. Remote folder – A folder path within the remote bucket.

   5. Access key – An access key for the remote bucket. It must be generated within the remote cloud storage service.

   6. Secret key – An S3 secret key that is generated with the access key.

3. Click Move. A confirmation message appears.

   Image Removed

Report generation

When data is moved irrespective of whether it is failed or successful, the report icon gets enabled for that bucket.

Refer to the following steps to generate a report:

1. Click corresponding to the bucket.

   1. Scenario 1: When data is migrated successfully and the report is generated, all the objects available in the selected bucket are displayed along with their object name and object status. It gives a preview of the bucket content report.

      Image Removed

   2. Scenario 2: When the data migration is failed for a bucket and the report is generated, it shows the reason for the data migration failure.

      Image Removed

2. Click Download. It will either download or pop up in a browser tab depending on how the browser handles the content type of the JSON file.

User Profile

...

Click on periferyadmin at the top right corner. It shows two options, Change password and Logout.

...

To change the password, select Change password.

...

1. Enter the current password.

2. Enter a new password.

3. Re-enter the new password in Confirm password field.

4. Click Save. A confirmation message appears saying that ‘Password changed successfully'.

...

Navigate to Advanced > Content Management > click Manage Content. This will open the Content Portal in a new browser tab. For more information about Content Portal, see Using the Content UI.

...

Data Migration

After successfully uploading content to Perifery Transporter, migrate it to any remote S3 destination. For step-by-step guidance, see https://perifery.atlassian.net/wiki/spaces/DOCS/pages/3132293151/DRAFT+Transporter+User+Guide#Data-migration.