I have installed If you install Swarm 8 on my a current CSN, and then tried try to install CSN 8 (which includes Swarm 8 already). I , you get this error:
Code Block | ||
---|---|---|
| ||
# ./caringo-csn-bundle-install.sh |
...
Error: Multilib version problems found. |
This often means that multilib version-checking is indicating another problem, so the root cause is something else
...
1. :
Missing Dependency — You have an upgrade for caringo-castor
which is missing some
dependency some dependency that another package requires. Yum is trying to
solve to solve this by installing an older version of caringo-castor
of the
different the different architecture. If you rerun the upgrade with a flag to exclude the bad architecture
, yum will tell you what the root cause is (which package
requires package requires what). You can try redoing the upgrade with:
... this should give you an error
--exclude caringo-castor.otherarch
message showing the root cause of the problem.2.
Duplicate Architectures — You have multiple architectures of caringo-castor
installed, but
yum but yum can only see an upgrade for one of those arcitecturesarchitectures.
If If you don't want/ need both architectures anymore then you
can remove , remove the one with the missing update and everything
will everything will work.
3. Duplicate Versions — You have duplicate versions of caringo-castor
installed already.
You can use Use "yum check
" to get yum show see these errors. ...you can also Do not use --setopt=protected_multilib=false
to remove
this checking, however this is almost never the correct thing to
do as something else is very suppress checking: something else is likely to go wrong (often , causing
much more problems).
Code Block | ||
---|---|---|
| ||
Protected multilib versions: caringo-castor-8.0-0.x86_64 != caringo-castor-8.0-1.x86_64 |
...
======================================================================== |
...
fatal: There were errors in the CSN installation. Please correct the errors and try again. |
To fix this problem, remove the existing Swarm 8 version and re-run the installer.
Code Block | ||
---|---|---|
| ||
# yum remove caringo-castor-8.0-1.x86_64 |
After CSN installation, the CSN will reboot. ThenThen, verify that the Swarm 8 version is selected: in the CSN UI, open the Netboot Management tab in the CSN UI.