...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
| Warning |
|---|
DeprecatedThe Legacy Admin Console (port 90) is still available but has been replaced by the Swarm Storage UI. (v10.0) |
...
A node shutdown or rebooted by an Administrator appears with a Maintenance state on other nodes in the cluster.
...
Messages display in the node status area if removing or inserting a drive into a running node. This feature, referred to as hot plugging (adding a new drive) or hot swapping (replacing a failed drive), allows removal of failed drives for analysis or to add storage capacity to a node at any time.
...
Hardware status reporting is dependent on hardware supporting and populating IPMI sensors, SMART status, and, in some cases, manufacturer-specific components such as SAS. Not all status fields are populated depending on the hardware. The hardware status values are independently scanned and populated for each node, allowing variations in supported utilities on a node-by-node basis.
...
The data in the Network Test Results window allows comparing the responding nodes with the list of expected nodes in the cluster. Evaluate UDP packet loss and TCP connectivity within the cluster.
...