...

• DNS Settings - These are required for DHCP configuration.

• Disk Encryption Settings - These settings are related to “Encryption at Rest” and should be skipped unless specified by DataCore Support. 

Finalize Configuration Settings

1. Run

   Code Block
   scsctl diagnostics config scan_missing

   Code Block
   language bash
   ======================================================================================================  Component: network_boot  ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP]  Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!  If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible.

2. Click ‘Enter‘ to apply the settings when prompted for the DNS servers.

   Code Block
   language bash
   ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Missing setting: network_boot/network.dnsServers  Where would you like to update this setting? > As a default at group level    For each instance in the group    Skip this setting for now

3. Provide the DNS servers.

   Code Block
   language bash
   ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Missing setting: network_boot/network.dnsServers  network.dnsServers [type: array[str]] (Required. DNS servers to be used.): 172.16.33.4,172.16.33.5 ======================================================================================================  Component: platform  ------------------------------------------------------------------------------------------------------  Name: admin.password  Type: str  Description: Administrative user password  ------------------------------------------------------------------------------------------------------  Name: admin.userName  Type: str  Description: Administrative user name  ------------------------------------------------------------------------------------------------------  Name: logging.syslogHost  Type: str  Description: If defined, then the host that component instances should use for syslog logging.  ------------------------------------------------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  ------------------------------------------------------------------------------------------------------  Name: network.ntpServers  Type: array[str]  Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network. ------------------------------------------------------------------------------------------------------  Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP]  Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible. -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------

4. Click ‘Enter‘ to apply at the group level when prompted for the DNS domain.

   Code Block
   language bash
   -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------  Missing setting: platform/network.dnsDomain Where would you like to update this setting?  > As a default at group level    For each instance in the group    Skip this setting for now

5. Set the DNS domain.

   Code Block
   language bash
   -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------  Missing setting: platform/network.dnsDomain   network.dnsDomain [type: str] (Required. The DNS domain name that will be used.):   datacore.internal ====================================================================================================== Component: storage ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeyPrimary Type: str Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeys Type: dict[str,str] Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. ------------------------------------------------------------------------------------------------------ Name: support.proxyPassword Type: str Description: Proxy authentication password ------------------------------------------------------------------------------------------------------ Component Group: storage/objstor.scs-lab1.datacore.internal [DEFAULT GROUP] Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeyPrimary Type: str Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeys Type: dict[str,str] Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. ------------------------------------------------------------------------------------------------------ Name: support.proxyPassword Type: str Description: Proxy authentication password ------------------------------------------------------------------------------------------------------

6. Select Skip this setting for now and click ‘Enter‘.

   Code Block
   Missing setting: storage/disk.encryptionKeyPrimary Where would you like to update this setting? As a default at group level For each instance in the group > Skip this setting for now

7. The support proxy password applies if an HTTP proxy is needed for automatic health report submission. Select As a default at group level now and click ‘Enter‘.

   Code Block
   language bash
   Missing setting: storage/support.proxyPassword Where would you like to update this setting? > As a default at group level   For each instance in the group  Skip this setting for now

8. Enter the Proxy Password (e.g., datacore). The input characters are hidden for the password.

   Code Block
   Missing setting: storage/support.proxyPassword support.proxyPassword [type: str ***SECURE***] (Proxy authentication password): Please re-enter to confirm:

Notes on Administrative User Name

If SCS is being installed with an existing Swarm storage cluster, then care must be taken to ensure that the SCS administrative user name matches the administrative user name within the storage cluster. This must occur before booting any nodes with SCS. To update the administrative user name at this point:

scsctl platform config set -d "admin.userName={existing cluster administrative user name}" --allow-notification-failures