...
Plugin the USB key into the Transporter device.
Plug the Transporter device and computer/laptop into the same network switch.
Power on the device. Now, the device will be accessible via the network and the reboot process will start.
Reboot
Reboot takes a few minutes to start the Perifery Transporter so please wait until the reboot process is finished. You will see the following screens during the reboot:
...
Consult the sheet that came with the device for the URL to enter into your browser to view the console. For example, the URL is http://frankenporter.local:9010/ui.
Reboot
Reboot takes a few minutes to reboot the Perifery Transporter. No action is required on your part; we recommend that you wait for the reboot to occur within its scheduled window.
...
When you reboot, it starts the following:
...
When the reboot is complete, it shows a confirmation message.
...
| Info |
|---|
The user needs to perform the same steps on every reboot. |
Step 2: Login
...
Enter the default username and password available on the sheet that came with the device.
Username – periferyadmin
Password – password
Click Login.
...