The whole installation process is being done offline, therefore, it is recommended to go through this quick start guide. Follow the Please follow these four simple steps to begin using Transporter:
| Table of Contents | ||||
|---|---|---|---|---|
|
In the Box
The following items should be present:
The Transporter device
A USB key (this is required to operate the Transporter)
A sheet with information about connecting to the device
Step 1: Connect the Transporter
Connect the Transporter device and your computer/laptop to a switch that is configured for DHCP. Power on the Transporter device that advertises the hostname on Port 9010 and provides browser access over the same network. Once it has powered on, the device will be accessible via the network. Consult the sheet that came with the device for the URL to enter into your browser to view the console.
Step 2: Login into Perifery
...
Enter the default username and password. These are also found on the sheet that came with the device.
Username – periferyadmin
Password – password
Click Login.
| Info |
|---|
Login will not be possible until all the services have fully come online. This may take several minutes. |
Step 3: Update your password
...