Versions Compared

Old Version 9

changes.mady.by.user Anjali Tyagi

Saved on

compared with

New Version 10

changes.mady.by.user Anjali Tyagi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • A dedicated vSwitch for the Swarm Storage Network before importing VMs with the dual virtual network card.

  • VMs created on VMware ESX 7.0 and must be loaded into 6.7U3 and above.

  • If using vCenter, use the VMware vAPP OVF datacore-swarm-14.1.2-ESX.ovf to load the entire set of VMs in one command. Must include the nvram files as well.

  • If not using vCenter, use an individual OVF for each template. This requires specifying the associated disk for each VM.

...

Deployment Requirement

Swarm 14.1 - ESXi-7.0 - Update 3 can be deployed on ESXi 6.7 and above. See VMware Knowledge Base for the end of life (EOL) statement regarding ESX 6.x.

Info

Info

  • All VMs have dual virtual network cards; one for the public client network and another for the Swarm Storage Network.

  • For SwarmSearch1, the public-facing network card is not connected for security reasons.

  • VMware ESX 6.7U3 is required if using vCenter 6.7.

  • All access credentials use the default password “datacore”.

...

Info

Related Pages

...