Page Comparison

1. On the Elasticsearch Summary page, hardware specifications are prefilled as per data uploaded using the YAML file. These prefilled hardware specifications (number of nodes, CPU cors per node, and memory per node) are editable so the customer can update values as required and click Next to proceed.

   Image Added

2. Add one or multiple Elasticsearch nodes as required, using Add button.

3. Provide the vCenter host information including:.
   

   Image Added

   1. DataCenter & DataStore - Enter the datacenter and datastore name of the vCenter host.

   2. ESX Host FQDN - Enter the ESX hostname of the vCenter.

   3. Management Network - Private network

   4. Storage Network - Public network

4. Provide the below Elasticsearch information for installation:.

   Image Added

   1. Enter the hostname, domain name, and private IP of Elasticsearch.

   2. If the private IP is static:

      1. Provide private network IP with network mass subnet and network gateway IP address.

      2. Add the number of DNS servers required.

5. Select the storage IP as static or DHCP.

6. Click Next Add. It adds Elasticsearch hostname information. The hostname information is editable so a customer can update it if required or can delete it if not required anymore.

   Image Added

7. Click Install to initiate installing Elasticsearch. Wait for a few seconds Elasticsearch to install Elasticsearch on the VM.

   Image Added

...