Page Comparison

...

• Density-friendly machine addressing — With Storage 10.0, Swarm has a new internal architecture so that it can easily leverage very dense servers that have a lot of CPU cores and disks. The visible effect of having a single IP per physical or virtual machine is that far fewer IP addresses are needed for deployment, which simplifies network administration, monitoring, and architecture. With Swarm 10's new single-IP address architecture, every physical or virtual machine only requires one IP address, and each Swarm "node" refers to the machine that hosts it, because only a single instance of Swarm software runs on it.

• Settings Checker — A new Storage Settings Checker tool, bundled with the Swarm Support Tools, identifies configuration changes needed to support the new Swarm 10 architecture. For this and all future upgrades of Swarm, running the settings checker before upgrading or during troubleshooting greatly improves Support's ability to keep the configuration pruned and tuned. See Storage Settings Checker.

• Remote replication without VPN tunnels — The push-style (direct POST) replication protocol introduced in 9.6 offers better performance and flow control. With 10.0, direct POST now supports SSL/TLS network encryption and standard proxy servers for replication feeds, which eliminates the need for separate VPN tunnels between clusters. This capability streamlines deployments where encrypted communications are needed over wide-area, untrusted networks. See Replicating Feeds over Untrusted Networks.

  • Swarm now supports using SSL for remote replication data transfer. This configuration requires an SSL offload proxy (such as HAProxy) in the target cluster environment. (SWAR-7826)

  • For sites using SSL with remote replication, Swarm allows the establishment of trusted certificates (public keys) that may be self-signed. (SWAR-8080) See Adding a Trusted Certificate to Swarm.

  • Swarm allows placing a forward proxy to the source cluster into the replication path. (SWAR-8025)

• Elasticsearch 5.6 — Swarm now ships with Elasticsearch 5.6, which extends Swarm's built-in metadata searching capabilities and allows integration with readily available off-the-shelf tools (such as the ELK stack) that use Elasticsearch for data analytics and monitoring. Swarm remains backwards compatible with Elasticsearch 2.3.3 to allow for a well-timed migration to the new version, which requires reindexing of your search data. See Migrating from Older Elasticsearch.

• Time of access (atime) tracking — Once you have begun reindexing your reindexing the search data on the new Elasticsearch 5.6 schema, you can enable Swarm's new atime (access time) feature, which gives your provides client applications a way method to track content usage and determine candidates for deletion or tiering to cold storage. See Time of Last Access - atime.

• Improved administration
  

  • Security: The SNMP password is separated from the security.administrators setting into its own setting (snmp.rwCommunity), as part of better administrative password handling. (SWAR-8097)

    • See Swarm Passwords.

  • Search:

    • The new "versioned" search query argument allows filtering objects based on the versioning status. It checks the value of the Castor-System-IsVersioned header, which captures whether versioning was enabled (true) or suspended (false) in the object's context at the time it was written. (SWAR-6851)

    • When indexing quoted strings, Swarm now preserves any existing RFC-2047 encoding. (SWAR-8089)

  • Logging:

    • To help troubleshoot a failure to boot, the Swarm console can now display the startup log ("castor_init"). Under Diagnostics, select "11. Castor Startup log". (SWAR-8070)

    • Upon boot, dmesg is now logged and preserved automatically as an historical record of the starting state of the machine. (SWAR-8040)

• OSS Updates — Storage 10.0 includes significant updates to third-party components. See Third-Party Components for 10.0 for the complete listing of packages and versions.

  • Upgraded kernel version to 4.14.53, linux firmware to 1.174, and bnx2 firmware to firmware-bnx2_20161130-3-bpo8+1. (SWAR-8048)

  • Added kernel support for Virtio devices in order to better support KVM virtual machines. (SWAR-8043)

  • Added the Broadcom NetXtreme driver, to support newer adapters. (SWAR-7627)

  • Updated third-party packages Twisted 18.4.0 and Boost 1.67. (SWAR-7981)

...

• SCSP fixes

  • When a write fails because volumes are not available, Swarm returns a 507 Insufficient Storage error rather than 4xx client errors. (SWAR-8073)

  • A multipart APPEND on a previously renamed object dropped the generation NID header, which prevented any segments written before the rename from finding the manifest, causing them to be deleted as orphans. (SWAR-8300)

  • Swarm no longer allows an object that has a multipart APPEND or PATCH initiated but then is updated by a POST or PUT to complete its multipart write, because those segments would be unable to find the new manifest, causing them to be deleted as orphans. (SWAR-8192)

• Feed fixes

  • During replication through Gateway, when Gateway disallowed replication on particular objects for whatever reason, Swarm treated those events as failures to be retried instead of allowing the feed to block. (SWAR-8060)

  • On the Feeds definition page of the legacy Admin Console (port 90), deselecting the "Propagate Deletes" checkbox had no effect on propagation. (SWAR-8076)

• Boot fixes

  • Rebooting a recovered volume could erroneously trigger a recovery (FVR). Upgrading to Swarm 10 and completing a full HP cycle prevents this from occurring. (SWAR-8081)

  • Errors (Failed to start Create Volatile Files and Directories) appeared on the Swarm console during startup. (SWAR-7762)

  • When using DHCP IP assignment (no assigned network.ipAddress), Swarm 9.6+ failed to boot. (SWAR-8212)

...

1. Download the correct bundle for your site. Swarm distributions bundle together the core components that you need for both implementation and later updates; the latest versions are available in the Downloads section on the DataCore Support Portal.
   There are two bundles available:

   • Platform CSN 8.3 Full Install or Update (for CSN environments) — Flat structure for scripted install/update on a CSN (see CSN Upgrades).

   • Swarm 10 Software Bundle (Platform 9.x and custom environments) — Contains complete updates of all core components, organized hierarchically by component.

     Info
     title Note
     Contact DataCore Support for new installs of Platform Server and for optional Swarm client components, such as SwarmFS Implementation, that have separate distributions.

2. Download the comprehensive PDF of Swarm Documentation that matches your bundle distribution date, or use the online HTML version from the Documentation Archive.

3. Choose your type of upgrade. Swarm supports rolling upgrades (a single cluster running mixed versions during the upgrade process) and requires no data conversion unless specifically noted for a particular release. Upgrades can be performed without scheduling an outage or bringing down the cluster. Restart the nodes one at a time with the new version and the cluster continues serving applications during the upgrade process.

   • Rolling upgrade: Reboot one node at a time and wait for its status to show as "OK" in the UI before rebooting the next node.

   • Alternative: Reboot the entire cluster at once after the software on all USB flash drives or the centralized configuration location has been updated.

4. Choose whether to upgrade Elasticsearch 2.3.3 at this time. 

   • To upgrade to Elasticsearch 5.6 with an existing cluster, you must reindex your Search data and migrate any Metrics data that you want to keep. See Migrating from Older Elasticsearch for details. (SWAR-7395) 

5. Note these installation issues:

   • The elasticsearch-curator package may show an error during an upgrade, which is a known curator issue. Workaround: Reinstall the curator: yum reinstall elasticsearch-curator (SWAR-7439)

   • Do not install the Swarm Search RPM before installing Java. If Gateway startup fails with "Caringo script plugin is missing from indexer nodes", uninstall and reinstall the Swarm Search RPM. (SWAR-7688)

   • During a rolling upgrade from 9.0.x–9.2.x, you may see intermittent "WriterMissingRemoteMD5 error token" errors from a client write operation through the Gateway or on writes with gencontentmd5 (or the equivalent). To prevent this, set autoRepOnWrite=0 during the upgrade and restore autoRepOnWrite=1 after it completes. (SWAR-7756)

6. Review the Application and Configuration Guidance.