Page Comparison

...

1. Run scsctl diagnostic diagnostics config scan_missing.

   Code Block
   language bash
   ======================================================================================================  Component: network_boot  ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP]  Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance!  If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible.

2. When prompted for the DNS servers, hit ‘Enter’ to apply settings as a default at the group level.

   Code Block
   language bash
   ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Missing setting: network_boot/network.dnsServers  Where would you like to update this setting? > As a default at group level    For each instance in the group    Skip this setting for now

3. Enter DNS servers.

   Code Block
   language bash
   ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Missing setting: network_boot/network.dnsServers  network.dnsServers [type: array[str]] (Required. DNS servers to be used.): 172.16.33.4,172.16.33.5 ======================================================================================================  Component: platform  ------------------------------------------------------------------------------------------------------  Name: admin.password  Type: str  Description: Administrative user password  ------------------------------------------------------------------------------------------------------  Name: admin.userName  Type: str  Description: Administrative user name  ------------------------------------------------------------------------------------------------------  Name: logging.syslogHost  Type: str  Description: If defined, then the host that component instances should use for syslog logging.  ------------------------------------------------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  ------------------------------------------------------------------------------------------------------  Name: network.ntpServers  Type: array[str]  Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network. ------------------------------------------------------------------------------------------------------  Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP]  Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible. -------------------------------------------------------------  Name: admin.password  Type: str  Description: Administrative user password  -------------------------------------------------------------  Name: admin.userName  Type: str  Description: Administrative user name  -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------

4. When prompted for the administrative password, hit ‘Enter’ to apply the password at the group level.

   Code Block
   language bash
   Missing setting: platform/admin.password Where would you like to update this setting?  > As a default at group level    For each instance in the group    Skip this setting for now

5. Enter the administrator password (e.g., datacore). The input characters are hidden for the password.

   Code Block
   Missing setting: platform/admin.password admin.password [type: str ***SECURE***] (Administrative user password):    Please re-enter to confirm:

6. When prompted for the administrative user name, hit ‘Enter‘ to apply the user name at the group level.

   Code Block
   language bash
   Missing setting: platform/admin.userName Where would you like to update this setting?  > As a default at group level    For each instance in the group    Skip this setting for now

7. Enter the administrator username (e.g., dcadmin). The input characters are hidden for the administrator username.

   Code Block
   language bash
   Missing setting: platform/admin.userName  admin.userName [type: str ***SECURE***] (Administrative user name):  Please re-enter to confirm:    Authentication state may have changed in the API!  Please log in, then re-run this command to resume:    > scsctl auth login --user "{administrative user name}"    > scsctl diagnostics config scan_missing

8. At this point, the SCS API is locked, and all requests must be authenticated. Login to SCS CLI via scsctl auth login --user [administrative user name]. The below example uses the sample administrative user name from above. The input characters are hidden.

   Code Block
   language bash
   [root@zorc Platform]# scsctl auth login --user dcadmin  Enter password for user "dcadmin":  Logged in

9. Once you are logged in, continue finalizing configuration settings via scsctl diagnostics config scan_missing command.

   Code Block

   ======================================================================================================  Component: network_boot  ----------------------------------------------  Name: network.dnsServers  Type: array[str]  Description: Required. DNS servers to be used.  ----------------------------------------------  Component Group: network_boot/192.168.9.0x24.network_boot.scs-lab1.datacore.internal [DEFAULT GROUP]  all settings defined for group ====================================================================================================== Component: platform  ------------------------------------------------------------------------------------------------------  Name: admin.password  Type: str Description: Administrative user password  ------------------------------------------------------------------------------------------------------  Name: admin.userName  Type: str  Description: Administrative user name  ------------------------------------------------------------------------------------------------------  Name: logging.syslogHost  Type: str  Description: If defined, then the host that component instances should use for syslog logging.  ------------------------------------------------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used. ------------------------------------------------------------------------------------------------------  Name: network.ntpServers  Type: array[str]  Description: Required. The IP address(es) of one or more NTP servers. If the nodes cannot access public NTP servers, they will time out waiting for a connection and automatically restart. Only use trusted NTP servers, whether they are dedicated hardware solutions in your internal network or external, public servers that the nodes can access over the network. ------------------------------------------------------------------------------------------------------  Component Group: platform/global.platform.scs-lab1.datacore.internal [DEFAULT GROUP]  Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! If any new instances are added, please define these settings, or define them at the group level to apply to all instances.  Best practice is to define them at the group level if possible.

10. When prompted for the DNS domain, hit ‘Enter‘ to apply it at the group level.

    Code Block
    language bash
    -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------  Missing setting: platform/network.dnsDomain Where would you like to update this setting?  > As a default at group level    For each instance in the group    Skip this setting for now

11. Set the DNS domain.

    Code Block
    language bash
    -------------------------------------------------------------  Name: network.dnsDomain  Type: str  Description: Required. The DNS domain name that will be used.  -------------------------------------------------------------  Missing setting: platform/network.dnsDomain   network.dnsDomain [type: str] (Required. The DNS domain name that will be used.):   datacore.internal ====================================================================================================== Component: storage ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeyPrimary Type: str Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeys Type: dict[str,str] Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. ------------------------------------------------------------------------------------------------------ Name: support.proxyPassword Type: str Description: Proxy authentication password ------------------------------------------------------------------------------------------------------ Component Group: storage/objstor.scs-lab1.datacore.internal [DEFAULT GROUP] Instances cannot currently inherit these from the group (since they have not been defined at the group level), so these settings must instead be defined for each instance! If any new instances are added, please define these settings, or define them at the group level to apply to all instances. Best practice is to define them at the group level if possible. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeyPrimary Type: str Description: The mnemonic name of the encryption key to use for encrypting new Swarm volumes. Do not use quotes. For this key to be used, disk.encryptNewVolumes must be set to True. ------------------------------------------------------------------------------------------------------ Name: disk.encryptionKeys Type: dict[str,str] Description: A comma-separated list of mnemonic name and encryption key pairs, used for accessing encrypted Swarm volumes. ------------------------------------------------------------------------------------------------------ Name: support.proxyPassword Type: str Description: Proxy authentication password ------------------------------------------------------------------------------------------------------

12. Select Skip this setting for now and hit Enter.

    Code Block
    Missing setting: storage/disk.encryptionKeyPrimary Where would you like to update this setting? As a default at group level For each instance in the group > Skip this setting for now

13. The support proxy password applies if an HTTP proxy is needed for automatic health report submission. Select As a default at group level now and hit Enter.

    Code Block
    language bash
    Missing setting: storage/support.proxyPassword Where would you like to update this setting? > As a default at group level   For each instance in the group  Skip this setting for now

14. Enter Proxy Password (e.g., datacore). The input characters are hidden for the password.

    Code Block
    Missing setting: storage/support.proxyPassword support.proxyPassword [type: str ***SECURE***] (Proxy authentication password): Please re-enter to confirm:

...