Using the pattern determined in network planning for the site, this scsctl initialization step will build a custom configuration file for DHCP and restart the service. Changes in the configuration file specify pools and ranges which DHCP is to manage, as well as other DHCP response data to be used with PXE booting storage nodes.
...
The configuration values used for DHCP reserve lower or upper range always come from the network planning.
Once either the lower or upper range is set for DHCP, you can enable the nodeExporter for Prometheus using the below commands.
...
| language | bash |
|---|
...
For setting up more configuration for DHCP, see additional Swarm configuration.
| Tip |
|---|
Next, install Swarm license. |
...