This section describes how to set up the network services for your storage cluster.
| Info | ||
|---|---|---|
| ||
| If you use Platform Server, skip this section: your network services are set up. |
...
| Info | ||
|---|---|---|
| ||
| NTP 3.0 included a design limitation that causes the time value to wrap in the year 2036. If the BIOS clock in a cluster node is set beyond this wrap point, NTP cannot correct the time. Before you boot Swarm in your cluster, ensure that the BIOS clocks in all nodes are set to a year prior to 2036. This issue was resolved in NTP 4.0. |
If the configured NTP server(s) cannot be reached, the node will not boot. If the cluster nodes cannot access an external or internal NTP server, see Configuring a Node without NTP.
...
| Info | ||
|---|---|---|
| ||
If you need to disable SNMP cluster-wide, such as for a security need or using Swarm in containers, disable the Swarm Storage setting |
Swarm uses an SNMP management information base (MIB) definition file to map SNMP object identifiers (OIDs) to logical names. The MIB can be located in one of two locations, depending on your configuration:
...